67:1 Metall Getriebemotor 37Dx54L mm

27,25 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.2000 kg

Hersteller: Pololu

Lagerbestand: 2

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Art.Nr.: 1105
     

Produktbeschreibung

Getriebemotor mit Metallzahnrädern und einer Übersetzung von 67:1.
Der Motor ist für den Betrieb an 12V ausgelegt, dabei erreicht er eine Drehzahl von 150 U/min. Die Lehrlaufstromaufnahme beträgt 300mA unter Last fließt ein Strom bis 5A. Der Motor hat ein Drehmoment von bis zu 1,37Nm (14kg cm).


This 2.13" x 1.45" x 1.45" gearmotor is a powerful brushed DC motor with 67:1 metal gearbox intended for operation at 12 V. These units have a 0.61"-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an integrated encoder.

Key specs at 12 V: 150 RPM and 300 mA free-run, 200 oz-in (14 kg-cm) and 5 A stall.

Gearmotor Options

This powerful brushed DC gearmotor is available in six different gear ratios. A version with an integrated encoder is also available.

These motors are intended for use at 12 V, though the motor can begin rotating at voltages as low as 1 V.

Gearmotor Dimensions:

The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm apart. You can use our custom 37D metal gearmotor bracket (shown in the left picture below) to mount the gearmotor to your project via these mounting holes and the screws that come with the bracket.

Please note that unlike our smaller metal gearmotors, these 37D mm gearmotors have output shafts with a diameter of 6 mm. The Pololu universal aluminum mounting hub for 6mm shafts can be used to mount our larger Pololu wheels (80mm- and 90mm-diameter) or custom wheels and mechanisms to the gearmotor’s output shaft (see the right picture above).

The picture below shows the dimensions (in mm) of the 37D mm line of gearmotors. The value of X is 22 mm for the 19:1 37Dx52L mm and 29:1 37Dx52L mm versions, 24 mm for the 50:1 37Dx54L mm and 67:1 37Dx54L mm versions, and 26.5 mm for the 100:1 37Dx57L mm and 131:1 37Dx57L mm versions.

Warning: Do not screw too far into the mounting holes as the screws can hit the gears. We recommend screwing no further than 3mm (1/8") into the screw hole.

The operational specs listed in the table below were measured at 6 V. At 12 V, the no-load RPM, stall current, and stall torque will all be approximately twice their 6V values. To see the motor specs for 12V operation, please see the short description at the top of this page or this product’s specification tab.

Selecting the Right Gearmotor

We offer a wide selection of metal gearmotors that offer different combinations of speed and torque. Our metal gearmotor comparison table can help you find the motor that best meets your project’s requirements.


Kunden kauften auch

Sharp GP2Y0A41SK0F

Sharp GP2Y0A41SK0F

11,50 EUR - 8,50 EUR

Motor Steuerung 9A FDS5672

Motor Steuerung 9A FDS5672

45,22 EUR

GP2Y0D810Z0F IR Entfernungsmesser 10cm

GP2Y0D810Z0F IR Entfernungsmesser 10cm

6,32 EUR

Fotowiderstand (LDR)

Fotowiderstand (LDR)

1,67 EUR

Pololu 37D mm Getriebemotorhalterung

Pololu 37D mm Getriebemotorhalterung

9,01 EUR