MPU9250 3-Achsen Beschleunigungssensor + Gyro + Magnetometer 9-DOF IMU

9,50 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0100 kg

Hersteller: HAOYU Electronics

Lagerbestand: 39

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Art.Nr.: 20160018
     

Produktbeschreibung

The MPU-9250 is a 9-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and a Digital Motion Processor™ (DMP) all in a small 3x3x1mm package available as a pin-compatible upgrade from the MPU-6515. With its dedicated I2C sensor bus, the MPU-9250 directly provides complete 9-axis MotionFusion™ output. The MPU-9250 MotionTracking device, with its 9-axis integration, on-chip MotionFusion™, and run-time calibration firmware, enables manufacturers to eliminate the costly and complex selection, qualification, and system level integration of discrete devices, guaranteeing optimal motion performance for consumers. MPU-9250 is also designed to interface with multiple non-inertial digital sensors, such as pressure sensors, on its auxiliary I2C port.

Features

- Three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs
- Three 16-bit ADCs for digitizing the accelerometer outputs
- Three 16-bit ADCs for digitizing the magnetometer outputs
- Gyroscope full-scale range of ±250, ±500, ±1000, and ±2000°/sec (dps)
- Accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g
- Magnetometer full-scale range of ±4800μT
- I2C and SPI serial interfaces
- Power supply: 3-5v

Applications

- TouchAnywhere™ technology (for “no touch” UI Application Control/Navigation)
- MotionCommand™ technology (for Gesture Short-cuts)
- Motion-enabled game and application framework
- Location based services, points of interest, and dead reckoning
- Handset and portable gaming
- Motion-based game controllers
- 3D remote controls for Internet connected DTVs and set top boxes, 3D mice
- Wearable sensors for health, fitness and sports

Documents

Kunden kauften auch

5.1V / 2.5A Raspberry Pi Netzteil (T6090DV)

5.1V / 2.5A Raspberry Pi Netzteil (T6090DV)

8,00 EUR

Testkabel / Jumper Wires M/M 100mm (für Breadboards)

Testkabel / Jumper Wires M/M 100mm (für Breadboards)

2,75 EUR

Pololu 5V Step-Up/Step-Down Schaltregler - S7V7F5

Pololu 5V Step-Up/Step-Down Schaltregler - S7V7F5

5,26 EUR

Raspberry Pi Kühlkörper Set - RPI-COOLKIT

Raspberry Pi Kühlkörper Set - RPI-COOLKIT

4,95 EUR - 4,35 EUR

LM35 DZ - Temperatursensor

LM35 DZ - Temperatursensor

1,00 EUR