ARM mbed NXP LPC1768 Development Board

53,55 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.1000 kg

Hersteller: Embedded Artists

Lagerbestand: 0

Nicht auf Lager.

Nicht auf Lager.

Art.Nr.: 20110567
     

Produktbeschreibung

The mbed is an easy-to-use MCU development board designed for rapid prototyping. At its heart is a powerful 32-bit ARM Cortex-M3 processor—the NXP LPC1768—running at 96 MHz with 512 KB flash and 64 KB RAM, which makes it far more capable than popular 8-bit prototyping alternatives. A comprehensive firmware library and plenty of sample code help you get your program up and running quickly, and a free online IDE and C++ compiler means that no software installation is required. Downloading programs is as simple as using a USB flash drive (no external programmer is necessary).
The mbed development board from ARM enables quick and easy creation of high-performance prototypes. Based on the powerful NXP LPC1768 Cortex-M3 processor, which runs at 96 MHz and offers 512 KB flash and 64 KB SRAM, the 32-bit mbed can handily outperform popular 8-bit prototyping platforms like the Arduino and Basic Stamp. The mbed also offers peripherals not typically found on lower-performance prototyping boards, such as ethernet, USB OTG, a 12-bit ADC, a 10-bit DAC for a true analog voltage output, in addition to more common interfaces like serial (UART), SPI, I2C, and CAN. The mbed has a 40-pin DIP form factor with 0.1"-pitch male header pins already soldered in, so it can be used with standard solderless breadboards and perfboards. (Note that while standard DIP ICs have a row spacing of 0.6", the mbed rows have a spacing of 0.9".)

One of the strengths of this platform is the mbed Library, which provides an API-driven approach to coding that eliminates much of the low-level work normally associated with MCU code development. Code can be developed using meaningful peripheral abstractions and API calls that are intuitive and well tested, freeing you up to experiment without worrying about the implementation of the MCU core or its peripherals.

Another key feature of the mbed is its unique C++ compiler and IDE. These free tools are entirely web-based and run online, which means there is no software to download or install. Supported browsers include Internet Explorer, Firefox, Safari, or Chrome running on a Windows, Mac, or Linux PC. You can log in from anywhere and simply pick up where you left off, and this approach makes it very easy to share code with others. And, since you’re working with a web-based tool, you can be confident that it is already configured and will stay up-to-date. The compiler uses the ARM RealView compile engine, so it produces clean, efficient, optimized code that can be used free-of-charge, even in production. Existing ARM application code and middleware can be ported to the LPC1768 microcontroller, and the mbed tools can be used alongside other professional production-level tools, such as Keil MDK.

No external programmer is required to program the mbed. When connected to your computer via the included USB cable, it shows up as a mass storage device. Simply save the compiled binary file to the board to program it.

Features

  • Can be powered by USB or an external 4.5 – 14 V supply
  • Compact module: 54 mm x 26 mm
  • Convenient form-factor: 40-pin DIP (0.9" row spacing), 0.1" pitch
  • Drag-and-drop programming, with the board represented as a USB drive
  • Best-in-class Cortex-M3 hardware
    • 96 MHz ARM with 64 KB of SRAM, 512 KB of Flash
    • Ethernet, USB OTG
    • SPI, I2C, UART, CAN
    • GPIO, PWM, ADC, DAC, DMA
  • Easy-to-use, free online tools
    • Web-based C/C++ programming environment
    • Uses the ARM RealView compile engine
    • API-driven development using libraries with intuitive interfaces
  • Comprehensive help and online community
  • On-board LEDs can be used for feedback, and a serial port over the USB connection allows for printf-style debugging

Getting Started

Getting started is as simple as using a USB Flash drive. Simply connect the mbed NXP LPC1768 board to a Windows, Mac, or Linux computer and it will automatically appear as a USB drive. Follow the link on the board to connect to the mbed website, where you can sign up and begin designing. There are no drivers to install or setup programs to run. Getting started is so easy that you can have a “Hello World!” program running in as little as five minutes.

The mbed development board includes the necessary USB A to mini-B cable, a printed quickstart guide, and two business cards that contain a life-size pinout diagram for the mbed.




Kunden kauften auch

JST 90° Steckverbinder

JST 90° Steckverbinder

1,03 EUR

Adafruit RGB Negative 16x2 LCD+Keypad Kit for Raspberry Pi

Adafruit RGB Negative 16x2 LCD+Keypad Kit for Raspberry Pi

26,51 EUR

125Khz RFID Empfänger Modul

125Khz RFID Empfänger Modul

13,52 EUR

PIC-ICSP Adapter

PIC-ICSP Adapter

3,51 EUR

LPD8806 RGB LED Streifen - 32 LEDs/m im Silikonschlauch (5m)

LPD8806 RGB LED Streifen - 32 LEDs/m im Silikonschlauch (5m)

124,95 EUR - 95,20 EUR

Empfohlenes Zubehör

m3pi Robot (für mbed)

m3pi Robot (für mbed)

148,75 EUR

ARM mbed NXP LPC11U24 Development Board

ARM mbed NXP LPC11U24 Development Board

41,65 EUR

ARM mbed Application Board

ARM mbed Application Board

53,55 EUR