Arduino Leonardo

19,04 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0260 kg

Hersteller: Arduino

Lagerbestand: 0

Nicht auf Lager.

Nicht auf Lager.

Art.Nr.: A000052
     

Produktbeschreibung

Das Arduino Leonardo ist ein günstiges Arduino Board welches auf dem ATmega32U4 aufbaut.


The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board; these are detailed on the getting started page.

This version of the Leonardo comes without headers. 

Summary

MicrocontrollerATmega32u4
Operating Voltage5V
Input Voltage (recommended)7-12V
Input Voltage (limits)6-20V
Digital I/O Pins20
PWM Channels7
Analog Input Channels12
DC Current per I/O Pin40 mA
DC Current for 3.3V Pin50 mA
Flash Memory32 KB (ATmega32u4) of which 4 KB used by bootloader
SRAM2.5 KB (ATmega32u4)
EEPROM1 KB (ATmega32u4)
Clock Speed16 MHz

If you want to give a closer look to this board we advice you to visit the official Arduino Leonardo page in the Hardware Section.

FAQ:

Q: Is the board compatible with all Arduino shields?

A: In general yes. But note that the SPI pins are not led out to the standard pins and the ext. IRQ pins are also not equal.


Kunden kauften auch

OLED Breakout Board - 16-bit Color 0.96

OLED Breakout Board - 16-bit Color 0.96" w/microSD holder

31,82 EUR

Premium Male/Male Jumper Wires - 40 x 6

Premium Male/Male Jumper Wires - 40 x 6" (150mm)

4,76 EUR

ACS712 Low Current Sensor Breakout

ACS712 Low Current Sensor Breakout

12,93 EUR

Atmel Sensors Xplained Pressure One (ATAVRSBPR1)

Atmel Sensors Xplained Pressure One (ATAVRSBPR1)

Nur 23,80 EUR Statt 29,75 EUR

Schrittmotor NEMA 17: Unipolar/Bipolar, 200 Steps, 42x48mm, 4.0V, 1.2A

Schrittmotor NEMA 17: Unipolar/Bipolar, 200 Steps, 42x48mm, 4.0V, 1.2A

21,48 EUR

Empfohlenes Zubehör

Kabel USB A - micro USB B 5 pol. - 3m

Kabel USB A - micro USB B 5 pol. - 3m

2,50 EUR

Kabel USB A - micro USB B 5 pol. - 1,8m

Kabel USB A - micro USB B 5 pol. - 1,8m

2,00 EUR