BMP180 Breakout - Barometric Pressure Sensor

10,76 EUR

incl. 19 % USt zzgl. Versandkosten

Hersteller: SparkFun

Lagerbestand: 0

Nicht auf Lager.

Nicht auf Lager.

Art.Nr.: SEN-11824
     

Produktbeschreibung

Alternative: BMP280 oder BME280 Breakout

This is a breakout board for the Bosch BMP180 high-precision, low-power digital barometer. The BMP180 offers a pressure measuring range of 300 to 1100 hPa with an accuracy down to 0.02 hPa in advanced resolution mode. It's based on piezo-resistive technology for high accuracy, ruggedness and long term stability. These come factory-calibrated, with the calibration coefficients already stored in ROM. What makes this sensor great is that it is nearly identical to its former rev, the BMP085!

This breadboard-friendly board breaks out every pin to a 6-pin 0.1" pitch header. VCC can be from 1.8V to 3.6V and is 5V tolerant; we typically run it on a clean, regulated 3.3V supply. The analog and digital supplies (VDDD and VDDA) are tied to a single header pin, but are separately decoupled. It connects to a microcontroller via I²C bus (also known as TWI, or on the Arduino, the "Wire" library).

Features:

  • Digital two wire (I²C, TWI, "Wire") interface
  • Wide barometric pressure range
  • Flexible supply voltage range (1.8V to 3.6V)
  • Ultra-low power consumption
  • Low noise measurements
  • Factory-calibrated
  • Includes temperature sensor
  • Low-profile with a small footprint

Documents:


Kunden kauften auch

Eval Board mit dem MLX90614 IR Thermometer

Eval Board mit dem MLX90614 IR Thermometer

54,04 EUR

2.8

2.8" TFT Touch Shield für Arduino v2

37,81 EUR

CP2104 USB-to-Serial Adapter Carrier

CP2104 USB-to-Serial Adapter Carrier

6,32 EUR

LM35 CZ - Temperatursensor

LM35 CZ - Temperatursensor

3,00 EUR - 2,50 EUR

RGB LED klar (gemeinsame Kathode)

RGB LED klar (gemeinsame Kathode)

1,31 EUR