RedBear BLE Mini - Bluetooth Low Energy

38,03 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0120 kg

Hersteller: RedBearLab

Lagerbestand: 0

Nicht auf Lager.

Nicht auf Lager.

Art.Nr.: WLS01311P
     

Produktbeschreibung

Bluetooth 4.0 Breakout auf Basis des Texas Instruments CC2540.
Das Modul kann extern über 3,4-11V, USB, Knopfzelle oder LiPo Akku versorgt werden. Auf dem Board befinden sich
512Kb EEPROM, 2 LEDs (Blue & Green), Taster und zusätzlich kann ein Knopzellenhalter (im Lieferumfang) angelötet werden. Alle Pins des CC2540 sind auf Stiftleisten herausgeführt.


You can now utilize Bluetooth 4.0 Low Energy (BLE) technology easily in your project with our BLE Mini. BLE Mini requires only a serial port for communication so it supports all major development platforms that have UART interface including Arduino, Raspberry Pi, Netduino, BeagleBone etc. In addition, we provide you with access to all Ti's CC2540 I/O pins and the ability to upload firmware via USB, making the BLE Mini an ideal development/protoyping board for your BLE project/accessory/Appcessory.

Requirement
  • An iPhone 5, iPhone 4S, iPad mini, iPad with Retina display (4th gen), iPad (3rd gen) or iPod touch (5th gen) plus our App from iTunes App Store. You could also develop your own iOS App using our open source SDK or iOS's CoreBluetooth Framework.
  • Or a second BLE Mini (require Central role support which will be available in March 2013)
Features
  • Simple interface - with our pre-loaded firmware code name 'Biscuit', you could easily connect to any development board or IC with UART interface.
  • Compact form factor - this is a very popular request from makers using smaller Arduino boards like Arduino Mini/Micro/Nano/Pro Mini etc.
  • Support Central or Peripheral role - it can connect to other BLE Mini or BLE Shield, not just iOS device. (Central role support will be available in March 2013)
  • Standalone operation - Ti's CC2540 is a SoC (System-on-Chip) IC that can operate without any external microcontroller. You can develop your own firmware using IAR Embedded Workbench, all I/O pins of CC2540 are accessible.
  • Firmware upgradable - develop your own or download a "pre-packaged" firmware and upload to  BLE Mini via the USB connector, Ti CC Debugger is not required.
  • Provision for connection to external antenna.
Specification
Please visit RedBearLab for more info about this product and technical support.

Kunden kauften auch

Stapelbare Buchsenleisten (für Arduino Shields)

Stapelbare Buchsenleisten (für Arduino Shields)

1,79 EUR

Flyswatter2 ARM20TI14 - TI 14-pin JTAG Adapter

Flyswatter2 ARM20TI14 - TI 14-pin JTAG Adapter

25,77 EUR

Lötzinn 1,0mm Sn60Pb39Cu1 100g

Lötzinn 1,0mm Sn60Pb39Cu1 100g

5,36 EUR

WingFly-Shield (Schraubklemmen Shield)

WingFly-Shield (Schraubklemmen Shield)

9,95 EUR - 8,25 EUR

AI-Thinker ESP8266 ESP-05 WiFi/WLAN Modul

AI-Thinker ESP8266 ESP-05 WiFi/WLAN Modul

4,30 EUR