Entwicklungsboard mit dem PIC32MX440F512 Mikrocontroller. Es wird kein externer Programmer benötigt, da das Board über USB und den vorgeladen Bootloader geflasht werden kann.
The CUI32 is a new version of the CREATE USB Interface, based on a
32-bit PIC. The CUI32 ships with "StickOS" installed as its default
firmware - this is an full operating system (!) created by Rich Testardi
with an on-board BASIC compiler, line editor, debugger, profiler, and
simple file system to create new firmware programs and run them, without
having to install any software on your host computer... All that's
needed is a standard terminal emulator (Hyperterminal/Teraterm on
windows, the "screen" command in the OS X terminal, etc.)!
is a very elegant approach for beginners, and also works
great as a quick prototyping environment for advanced users - see a
couple of examples (using a different microcontroller) here
The CUI32 also ships with a standard bootloader pre-installed (in
addition to StickOS), so you don't need a PIC programmer to write your
own C programs either! All of Microchip's own examples from their USB framework
can be compiled for the CUI32, and while these are more complex than a
BASIC program written in StickOS, the CUI32 homepage and the Google Code
wiki will allow anyone to share examples that are set up specifically
for the CUI32.
Finally, since the CUI32 uses the same family of PIC32s (the PIC32MX440F512) as the UBW32 board
it is compatible with a lot of the resources that have been developed
in this open source project as well, such as this host application for
bootloading the board from OS X
4.0 x 1.7" (2.6 x 1.7 without prototyping area)