Gassensor Kohlenstoffmonoxid & Brennbares Gas (MQ9)

6,55 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0020 kg

Hersteller: Pololu

Lagerbestand: 31

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Art.Nr.: 1483
     

Produktbeschreibung

This Carbon Monoxide (CO) and flammable gas sensor detects the concentrations of CO and combustible gas in the air and ouputs its reading as an analog voltage. The sensor can measure concentrations of CO from 10 to 1,000 ppm and flammable gas from 100 to 10,000 ppm.The sensor can operate at temperatures from -10 to 50°C and consumes less than 150 mA at 5 V. Please read the MQ9 datasheet (180k pdf) for more information about the sensor.

Connections

Connecting five volts across the heating (H) pins keeps the sensor hot enough to function correctly. Connecting five volts at either the A or B pins causes the sensor to emit an analog voltage on the other pins. A resistive load between the output pins and ground sets the sensitivity of the detector. Please note that the picture in the datasheet for the top configuration is wrong. Both configurations have the same pinout consistent with the bottom configuration.The resistive load should be calibrated for your particular application using the equations in the datasheet, but a good starting value for the resistor is 20 kΩ.

We offer two breakout boards that make it easier to interface with these sensors: a Pololu carrier board and a SparkFun carrier board. The Pololu version is shown below.



Kunden kauften auch

ACS714 Stromsensor Breakout Board -5 to +5A

ACS714 Stromsensor Breakout Board -5 to +5A

11,01 EUR

ACS714 Stromsensor Breakout Board -30 to +30A

ACS714 Stromsensor Breakout Board -30 to +30A

9,82 EUR

MPU6050 3-Achsen Beschleunigungssensor + Gyro 6-DOF IMU

MPU6050 3-Achsen Beschleunigungssensor + Gyro 6-DOF IMU

4,50 EUR

MPL3115A2 - I2C Barometric Pressure/Altitude/Temperature Sensor

MPL3115A2 - I2C Barometric Pressure/Altitude/Temperature Sensor

10,89 EUR

Raspberry Pi 3 Modell B - 64Bit 1.2GHz Quad-Core ARM-Cortex-A53

Raspberry Pi 3 Modell B - 64Bit 1.2GHz Quad-Core ARM-Cortex-A53

38,00 EUR