Gassensor Kohlenstoffmonoxid (MQ7)

6,62 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0020 kg

Hersteller: Pololu

Lagerbestand: 5

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Art.Nr.: 1482
     

Produktbeschreibung

This Carbon Monoxide (CO) gas sensor detects the concentrations of CO in the air and ouputs its reading as an analog voltage. The sensor can measure concentrations of 10 to 10,000 ppm.The sensor can operate at temperatures from -10 to 50°C and consumes less than 150 mA at 5 V. Please read the MQ7 datasheet (185k pdf) for more information about the sensor.

Connections

Connecting five volts across the heating (H) pins keeps the sensor hot enough to function correctly. Connecting five volts at either the A or B pins causes the sensor to emit an analog voltage on the other pins. A resistive load between the output pins and ground sets the sensitivity of the detector. The resistive load should be calibrated for your particular application using the equations in the datasheet, but a good starting value for the resistor is 10 kΩ.

We offer two breakout boards that make it easier to interface with these sensors: a Pololu carrier board and a SparkFun carrier board. The Pololu version is shown below.


Kunden kauften auch

Particle Photon ohne Stiftleisten

Particle Photon ohne Stiftleisten

20,75 EUR

Fotowiderstand (LDR)

Fotowiderstand (LDR)

1,10 EUR

Hutschienen-Gehäuse für Raspberry Pi B+/Pi2/Pi3 - 45mm

Hutschienen-Gehäuse für Raspberry Pi B+/Pi2/Pi3 - 45mm

9,50 EUR

Breadboard Mini schwarz

Breadboard Mini schwarz

3,33 EUR

RedBear Blend Micro - BLE trifft auf Arduino Micro

RedBear Blend Micro - BLE trifft auf Arduino Micro

26,18 EUR