Digitales Speicher Oszilloskop Bausatz (DSO 062)

Statt 41,95 EUR Nur 35,70 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.1350 kg

Hersteller: JYE tech

Lagerbestand: 8

Lagernd, versandfertig in 24 Stunden.

Art.Nr.: 20091064I

Produktbeschreibung

Hierbei handelt es sich um den DSO Bausatz 06204KP von JYE Tech, es sind alle SMD Teile vorbestückt. Es müssen nur die bedrahteten Bauteile bestückt werden.

Ein Auszug aus den Verbesserungen:
- erweiterter Frequenzmessbereich bsi 10MHz
- einstellbarer Kontrast
- automatische Umschaltung zwischen DSO und Frequenzmessbetrieb
- weitere Verbesserungen sind in der Englischen Beschreibung zu finden

Lieferumfang:

- Alle benötigen Teile inkl. Leiterplatten (kein Netzteil)

- Bedienungsanleitung (englisch)
- Frontplatte

Technische Daten:

Max sample rate - 5M/s (AUTO mode),8 bits

Sample memory depth - 256 bytes

Analog bandwidth - 1MHz

Vertical sensitivity - 100mV/Div - 5V/Div

Vertical position adjustable with indicator

Input impedance - 1MO

Max input voltage - 50Vpp

DC/AC coupling

Horizontal - 2µs/Div - 10m(minute)/Div

Auto, normal and single trig modes

Rising/falling edge trigger

External trig available

Trig level adjustable with indicator

Hold/run feature

Save up to 6 captures to EEPROM and retain after power down

Retrieve and display saved captures

Transfer its screen to PC as bitmap file via serial connection

Built-in 500Hz/5Vpp test signal

Frequency counter (only for TTL level input signal)

9 DC power supply

Größe: 110mm X 65mm X 25mm (without case)

Englische Beschreibung und Downloads:

On top of all the features with existing versions the new models brought in the following improvements:

Vertical sensitivity indicator added

Couple setting indicator added. Screen display is now complete and helpful in situations where waveform captures need to be storaged for later analysis.

Auto switch between Oscilloscope Mode and Frequency Meter Mode

Wider measurement range for the frequency meter - up to 10MHz comparing to < 5MHz in existing models

LCD contrast adjustable by trimmer - easily accommodate LCDs from different manufacturers

Footprints provided for user analog extend/experiments - users can quickly build their own analog circuits (amplifiers, filters, oscillators, etc) using two redundant on-board opamps.

Removed conflict between LCD and buttons found in old version

Removed conflict between LCD mounting pins and 7805 heatsink found in old version

Test signal terminal relocated to the left side for quick connection

Precise voltage reference provided for accurate analog measurement

M64 programming header pinout changed to popular STK200 compatible

Alternative power supply connector, LCD trimmer, and M64 programming header were relocated to the bottom edge of board, where back panel has an opening for easy access.

More clear marks and better labeled

Resources:

Quick Reference

Operating Instructions

Main PCB mechanical file

Panel mechanical file

Kunden kauften auch

	IMU Fusion Board - ADXL345 & IMU3000 47,98 EUR
	RF Link Empfänger - 434MHz 4,28 EUR
	Getting Started with Processing 15,00 EUR
	Gyro Breakout - LISY300AL 300 °/sec 26,75 EUR