FG085 Funktionsgenerator Bausatz

Nur 41,65 EUR Statt 51,79 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.2000 kg

Hersteller: JYE tech

Lagerbestand: 3

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Art.Nr.: 20110130


The FG085 is a low cost yet versatile function generator capable of producing signals of many different waveforms. As an easy-to-use tool operation of FG085 is very simple and straightforward. It is an ideal test/experiment tool for electronic hobbyists and students.


- Generating continuous waveforms of Sine, Square, Triangle, Ramp (up and down), and Staircase (up and down)
- Generating user defined arbitrary waveforms (AWG)
- Generating frequency sweeping signals of selected waveforms. Start frequency, stop frequency, and sweep rate can be independently set [ NEW with firmware version 113-08501-120 or later]
- Generating servo test/control signals in micro-second resolution with user programmable pulse width, amplitude, and cycle
- Setting of frequency (or period), amplitude, and offset is done with digits - quick and straightforward
- Variable duty cycle from 1% - 100% for square signal
- Frequency (period), amplitude, and offset can be incrementally adjusted with rotary encoder
- Incremental step size can be set to any value. Very convenient for quickly adjust frequency/cycle arount a certain point or over a range [ NEW with firmware version 113-08501-110 or later]
- Trigger input available
- Synchorous output available for sweeping mode
- Settings are memorized after power down.
- Can be used as an adjustable DC voltage source by setting frequency to 0


Frequency range: 0 - 200KHz (Sine)
Frequency resolution: 1Hz
Period resolution: 1ms
Maximum frequency error (CW mode): 0.1490Hz for F > 40Hz, 0.000596Hz for F <= 40Hz
Maximum frequency error (Sweep mode): 0.1490Hz
Amplitude range: 0 - 10V peak-to-peak
Amplitude resolution: 0.1V
Offset range: -5V - +5V
Offset resolution: 40mV
Memory depth: 256 bytes
Sample rate: 2.5Msps
Trigger input level: High - 3.5V (min), Low - 1.5V (max)
Output delay at trigger: < 5us (when no panel operation)
Sync Output Level: 5V TTL
Output impedance: 50 ohm
Power supply voltage: DC 15V (maximun 16V DC)
Current comsuption: < 150mA (without loading)
Dimension: 155 X 55 X 30 mm

Documents, firmwares, and tools:

Kunden kauften auch

FTDI FT232RL Breakout Board

FTDI FT232RL Breakout Board

16,36 EUR

Kühlkörper 8 x 6 für A4983/A4988

Kühlkörper 8 x 6 für A4983/A4988

1,50 EUR - 1,00 EUR