The Genuino Zero is powered by Atmel’s SAMD21 MCU, which features a 32-bit ARM Cortex® M0+ core, clocked at 48MHz. This board has six analog inputs that can be configured for 10 or 12 bit sampling and also offers a Digital to Analog Converter (DAC) with 10 bit resolution for true analog signal output. Using Genuino Zero with Atmel Studio, you can use Atmel’s Embedded Debugger (EDBG), which provides a full debug interface without the need for additional hardware, making it significantly easier to debug software. EDBG also supports a virtual COM port that can be used for device and bootloader programming. To compare this board to the current, past or outdated boards see the Comparison Page.
If you want more information about programming and hardware
interfacing about Genuino Zero or how to interface hardware with it,
please go to the Product Page.
Genuino Zero is programmed, as all the other Genuino boards with the Software (IDE) that you can download for free, with the addition of the SAMD core to download with Board Manager. To find inspiration for what you can do with the Genuino ZERO, please visit the Genuino.cc Tutorials Page and take part in the community the lively discussions on the Forum.
|Microcontroller||ATSAMD21G18, 32-Bit ARM Cortex M0+|
|Input Voltage (recommended)||from 7 to 12 Volts|
|Digital I/O Pins||20|
|PWM Digital I/O Pins||All but pins 2 and 7|
|Analog Input Pins||6, 12-bit ADC channels|
|Analog Output Pins||1, 10-bit DAC|
|DC Current per I/O Pin||7 mA|
|Flash Memory||256 KB|
|Clock Speed||48 MHz|
6,78 EUR - 4,17 EUR
Nur 89,50 EUR Statt 94,95 EUR