10.1" 1280x800 IPS - HDMI/VGA/NTSC/PAL Display
Yes, this is an beautiful bright 10.1" TFT display with incredibly high
resolution and great angle-visibility! We tried to get the thinnest,
brightest, highest resolution display that would be good for embedded
computing usage. The visible display measures 10" diagonal and is a
'raw' display as is used in a tablet, ultra thin with some mounting tabs
around the edge. We include a driver board with HDMI, VGA and Composite
inputs. The display is very easy to use - simply connect the included
9VDC adapter to the 2.1mm center-positive DC jack, then connect a
digital video source to one of the ports. Voila, a display!
There's a little wired PCB with little buttons that let you enter a menu
system for adjusting brightness, color and contrast. It tried to
auto-detect which input you have and switches to that one or you can
'select' from the menu which to display.
To demonstrate it, we took some photos with the display connected to a
Raspberry Pi, but it will also work connected to any device with HDMI,
VGA or NTSC/PAL output. It will not work with a device that only outputs
DVI or SECAM.
For use with a Raspberry Pi we suggest editing config.txt to set
"hdmi_safe=1" output for best results (otherwise, the Pi may not
'recognize' the HDMI display and revert to composite output)
For use with a BeagleBone black, we found it works when plugged in, no
configuration required. You may need a mouse/keyboard to keep the Bone
display from going into 'sleep mode'
A 9V US-prong power adapter is no longer included.
Kunden kauften auch
Nur 3,57 EUR
Statt 6,51 EUR