LPC1788-32 Developer's Kit

201,11 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.4000 kg

Hersteller: Embedded Artists

Lagerbestand: 1

Lagernd, versandfertig in 24 Stunden.

Art.Nr.: EA-OEM-509

Produktbeschreibung

Embedded Artists' LPC1788 Developer's Kit lets you get up-and-running quickly with the LPC1788 OEM Board. The LPC1788 OEM Board is equipped with NXP's Cortex-M3 based LPC1788 microcontroller suitable for a wide range of applications that requires advanced communication and high quality graphic displays.

Display Options

Note that display options are sold separately

3.2 inch LCD display using the QVGA Display Adapter Kit or the QVGA Display Adapter if you already have the display
4.3 inch TFT LCD with touch
7.0 inch TFT LCD with touch

LPC1788 OEM Board

Processor	NXP's Cortex-M3 LPC1788 microcontroller in BGA package
Program Flash	128 MB NAND FLASH + 512 kB internal
Data Memory	32 MB SDRAM + 96 KB internal 32- or 16-bit data bus to SDRAM Note: The Developer's Kit initially only offer the 32-bit databus version.
Ethernet	100/10M Ethernet interface based on SMSC LAN8720 Ethernet PHY
Clock Crystals	• 12.000 MHz crystal for CPU • 32.768 kHz crystal for RTC
Dimensions	66 x 48 mm
Power	• +3.3V powering
Connectors	• 200 pos expansion connector (as defined in SODIMM standard), 0.6mm pitch
Other	• 256 Kbit I2C E2PROM for storing non-volatile parameters • Buffered 32- or 16-bit databus

OEM Base Board

Connectors and Interfaces	• 200 pos, 0.6mm pitch SODIMM connector for OEM Board • LCD expansion connector with control signals for touch screen interface • Expansion connector with all OEM Board signals • Ethernet connector (RJ45) • CAN interface & connector (provision for second CAN interface, but not mounted) • MMC/SD interface & connector • USB1: OTG or Host interface & connector • USB2: Device or Host interface & connector • Provision for NXP JN5148 RF module (former Jennic) interface (RF module not included) • Full modem RS232 (cannot be fully used on 32-bit databus OEM boards) • RS422/485 interface & connector • Provision for IrDA transceiver interface (transceiver not mounted) • I2S audio codec (mic in, line in, line out, headphone out) • SWD/JTAG connector • Trace connector and pads for ETM connector
Power	• Power supply, either via USB or external 5V DC • Optional coin cell battery for RTC and LED on ALARM output (coin cell not included)
Other	• OEM Board current measuring • Parallel NOR flash on external memory bus • 16-bit register and LEDs on external memory bus • 5-key joystick • 3-axis accelerometer (I2C connected) • LM75 temperature sensor (I2C connected) • 5 push-button keys (four via I2C and one on ISP-ENABLE) • 9 LEDs (8 via I2C and one on ISP-ENABLE) • Trimming potentiometer to analog input • USB-to-serial bridge on UART #0 (FT232R) and ISP functionality • Reset push-button and LED • Speaker output on analog output from OEM Board, or from I2S audio codec • 160x150 mm in size

Kunden kauften auch

	Testkabel / Jumper Wires F/M 100mm 2,75 EUR
	LPC1227 LPCXpresso 23,80 EUR
	LPC1788 OEM Board 117,81 EUR
	Flyswatter - ARM 20-Pin JTAG Adapter Kit 17,26 EUR
	Parallax PING))) Ultraschall Entfernungsmesser 27,50 EUR