LPC3152 Developers Kit

Nur 178,50 EUR Statt 213,01 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.4200 kg

Hersteller: Embedded Artists

Lagerbestand: 2

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Art.Nr.: EA-OEM-306
     

Produktbeschreibung

Das LPC3152 Developer's Kit ist mit einem ARM9 Controller von NXP bestückt. Auf dem Board befinden sich unter anderem:

  • 256 MB NAND FLASH
  • 4 MB NOR FLASH
  • 64 MB SDRAM 
  • 100/10Mbps Ethernet Interface (DM9000)


Embedded Artists' LPC3152 Developer's Kit lets you get up-and-running quickly with the LPC3152 OEM Board. The LPC3152 OEM Board is equipped with NXP's ARM926EJ-S based LPC3152 microcontroller suitable for a wide range of applications requiring low power consumption, high performance and flexible USB connectivity.

Watch a short multimedia presentation about how to get started with the board.

The Kit is perfect for running Linux with its large on-board RAM and Flash, network and graphics capabilities.

Focus on your value-added application by using this Developer's Kit as your prototyping platform. It includes the software components needed to get up-and-running with your software development on day 1.

When you are finished with prototyping and/or evaluation you can easily transfer your application and the OEM Board into production.

 
Processor NXP's ARM926EJ-S LPC3152 microcontroller in BGA package
External Flash 256 MB NAND FLASH (2Gbit)
4 MB SPI-NOR FLASH (32Mbit)
Data Memory 64 MB SDRAM + 192 KB internal
16-bit data bus to SDRAM
USB High-speed USB 2.0 (OTG, Host, Device) with on-chip PHY
Clock Crystals 12.000 MHz crystal for CPU
Dimensions 66 x 48 mm
Power Li-ion Battery or +5V powering
Connectors 200 pos expansion connector (as defined in SODIMM standard), 0.6mm pitch
Other • 256 Kbit I2C E2PROM for storing non-volatile parameters
• Buffered 16-bit databus

LPC31xx Base Board v2.0

Connectors • 200 pos SODIMM connector for LPC3152 OEM Board
• Expansion connector to 3.2 inch QVGA TFT color LCD with touch panel
• 3 Expansion connectors with all cpu signals
• Ethernet (RJ45) connector
• MMC/SD interface & connector
• USB OTG or Host connectors
• 3.5mm Audio connectors (mic in, 2x line out, headphone out)
• JTAG connector
• 3 terminal screw connector for battery
• 2.1mm Power input
Power Power supply, either via Li-ion battery, USB or external 9-15V DC
LPC3152 OEM Board is powered with Li-ion battery or +5V
Other • 100/10Mbps Ethernet interface (DM9000 based)
• UDA1380 I2S codec with mic in, line in, line out, and headphone out (typically not used when working with the LPC3152 since it has internal codec)
• Current monitors on input power voltages
• 5-key joystick
• 3 axis accelerometer
• 8 LEDs (via I2C)
• Trimpot analog input
• USB-to-serial bridge on UART
• RS232 alternative interface on UART
• XBee™ RF-module alternative interface on UART (note that XBee module is not included in bundle)
• Reset push-button and LED
• 205x135 mm in size