LPC3250 Developer's Kit

Produktbeschreibung

Das LPC3250 Developer's Kit ist ein Entwicklungskit mit dem NXP ARM926EJ-S LPC3250 Mikrocontroller.

Auf dem Board befinden sich unteranderem:
128 MB NAND FLASH (1Gbit)
4 MB SPI-NOR FLASH (32Mbit)
64 MB DDR SDRAM
3,2" QVGA TFT

Weitere Informationen finden Sie auf der Herstellerseite: http://www.embeddedartists.com/products/kits/lpc3250_kit.php

The Kit is perfect for running Linux with its large on-board RAM and Flash, network and graphics capabilities.

Focus on your value-added application by using this Developer's Kit as your prototyping platform. It includes the software components needed to get up-and-running with your software development on day 1.

When you are finished with prototyping and/or evaluation you can easily transfer your application and the OEM Board into production.

Low Cost

The LPC3250 OEM Board is very low cost and can be used for prototyping/development as well as for OEM production. Modifications for OEM applications can easily be done for volume customers. Contact Embedded Artists for further information about design and production services.

LPC3250 OEM Board

Processor	NXP's ARM926EJ-S LPC3250 microcontroller in BGA package
External Flash	128 MB NAND FLASH (1Gbit) 4 MB SPI-NOR FLASH (32Mbit)
Data Memory	64 MB DDR SDRAM + 256 KB internal 16-bit data bus to DDR SDRAM
Ethernet	100/10M Ethernet interface based on National DP83848 Ethernet PHY
Clock Crystals	13.000 MHz crystal for CPU
Dimensions	66 x 48 mm
Power	3.15V-3.3V powering
Connectors	200 pos expansion connector (as defined in SODIMM standard), 0.6mm pitch
Other	• 256 Kbit I2C E2PROM for storing non-volatile parameters • 5 LEDs • Buffered 16-bit databus

QVGA Base Board

Display	• 3.2 inch QVGA TFT color LCD with touch screen panel
Connectors	• 200 pos SODIMM connector for OEM Board • Expansion connector with all LCD controller signals, for custom displays • Expansion connector with all cpu signals • Ethernet connector (RJ45) • MMC/SD interface & connector • JTAG connector • Pads for ETM connector
Interfaces	• USB OTG interface & connector • USB host interface & connector • RS232 interface • IrDA tranceiver interface
Power	• Power supply, either via USB or external 9-15V DC • 0.3F capacitor backup for RTC and LED on ALARM output
Expansion	• Expansion connector with all LCD controller signals, for custom displays • Expansion connector with all cpu signals
Other	• 5-key joystick • 3 axis accelerometer • Push-button key and LED on P2.10 • 4 push-button keys via I2C • 8 LEDs (via I2C) • 1 Analog inputs • USB-to-serial bridge on UART #0, and ISP functionality • Reset push-button and LED • Speaker output (DAC) • 240x150 mm in size