LPC3250 Developer's Kit v2

213,01 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.5000 kg

Hersteller: Embedded Artists

Lagerbestand: 1

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Art.Nr.: EA-OEM-411


Das LPC3250 Developer's Kit ist ein Entwicklungskit mit dem NXP ARM926EJ-S LPC3250 Mikrocontroller.

Weitere Informationen finden Sie auf der Herstellerseite: http://www.embeddedartists.com/products/kits/lpc3250_kit_v2.php

The Kit is perfect for running Linux with its large on-board RAM and Flash, network and graphics capabilities.

Focus on your value-added application by using this Developer's Kit as your prototyping platform. It includes the software components needed to get up-and-running with your software development on day 1.

When you are finished with prototyping and/or evaluation you can easily transfer your application and the OEM Board into production.

LPC3250 OEM Board

Processor NXP's ARM926EJ-S LPC3250 microcontroller in BGA package
External Flash 128 MB NAND FLASH (1Gbit)
Data Memory 64 MB DDR SDRAM + 256 KB internal
16-bit data bus to DDR SDRAM
Ethernet 100/10M Ethernet interface based on National DP83848 Ethernet PHY
Clock Crystals 13.000 MHz crystal for CPU
Dimensions 66 x 48 mm
Power 3.15V-3.3V powering
Connectors 200 pos expansion connector (as defined in SODIMM standard), 0.6mm pitch
Other • 256 Kbit I2C E2PROM for storing non-volatile parameters
• 5 LEDs
• Buffered 16-bit databus

OEM Base Board

Connectors and Interfaces • 200 pos, 0.6mm pitch SODIMM connector for OEM Board
• LCD expansion connector with control signals for touch screen interface
• Expansion connector with all OEM Board signals
• Ethernet connector (RJ45)
• CAN interface & connector (provision for second CAN interface, but not mounted)
• MMC/SD interface & connector
• USB1: OTG or Host interface & connector
• USB2: Device or Host interface & connector
• Provision for NXP JN5148 RF module (former Jennic) interface (RF module not included)
• Full modem RS232 (cannot be fully used on 32-bit databus OEM boards)
• RS422/485 interface & connector
• Provision for IrDA transceiver interface (transceiver not mounted)
• I2S audio codec (mic in, line in, line out, headphone out) • SWD/JTAG connector
• Trace connector and pads for ETM connector
Serial Expansion Connector, 14-pos connector with UART/I2C/SPI/GPIO pins
Power • Power supply, either via USB or external 5V DC
• Optional coin cell battery for RTC and LED on ALARM output (coin cell not included)
Other • OEM Board current measuring
• Parallel NOR flash on external memory bus
• 16-bit register and LEDs on external memory bus
• 5-key joystick
• 3-axis accelerometer (I2C connected)
• LM75 temperature sensor (I2C connected)
• 5 push-button keys (four via I2C and one on ISP-ENABLE)
• 9 LEDs (8 via I2C and one on ISP-ENABLE)
• Trimming potentiometer to analog input
• USB-to-serial bridge on UART #0 (FT232R) and ISP functionality
• Reset push-button and LED
• Speaker output on analog output from OEM Board, or from I2S audio codec
• 160x150 mm in size

Kunden kauften auch

CY8CKIT-049-42XX Prototyping Kit

CY8CKIT-049-42XX Prototyping Kit

4,76 EUR