LPCXpresso Experiment Kit

Gewicht: 0.3800 kg

Hersteller: Embedded Artists

Lagerbestand: 0

Nicht auf Lager.

Nicht auf Lager.

Art.Nr.: EA-XPR-012
     

Produktbeschreibung

Dieser Artikel wurde vom Hersteller abgekündigt.

Das LPCXpresso Experiment Kit ist ein Einsteiger Set für doe LPCXpresso Boards der 1000er Serie, es dient zum Einstieg in die LPC Cortex-M0/M3 Controllerfamilie.

Das LPCXpresso Board muss separat erworben werden.


The LPCXpresso Experiment Kit has been created as a guided tour to learn embedded programming with NXP’s LPC1000 microcontroller family with Cortex-M0/M3 cores from ARM. The experiments can be performed on a breadboard for maximum flexibility and ease of use. It is also possible to solder the components to a printed circuit board (pcb) and learn soldering at the same time.

The kit requires an LPCXpresso LPC1000 board. This must be bought separately. .

All experiments are based around the LPCXpresso LPC1115 board (LPC1114 board is also ok to use). Some more advanced experiments with Ethernet and USB requires the LPCXpresso LPC1769 board.

The kit is perfect for:

  • professionals that want to learn the LPCXpresso evaluation boards and the LPCXpresso IDE.
  • students and hobbyists that want to learn more about embedded program development and programming microcontrollers.
  • University professors that want to have an education platform. The extensive experiment manual can be used as-is or as a base for developing lecture-tailored experiment.

Components included in the kit are:

  • 8x red LEDs
  • 2x Trimming potentiometers
  • 7x push-buttons
  • RGB-LED
  • Light sensor (analog)
  • Temperature sensor (analog)
  • 7-segment LED, dual digit
  • E2PROM with SPI interface
  • Temperature sensor with I2C interface (only for pcb mounting)
  • Piezo buzzer
  • Rotary quadrature encoder (only for pcb mounting)
  • Shift register
  • I2C ports expander (PCA9532, only for pcb mounting)
  • USB Host connector (only for pcb mounting)
  • USB Device connector (only for pcb mounting)
  • RJ45 connector for Ethernet (only for pcb mounting)
  • 14-pos serial expansion connector, for interface to for example graphical displays
  • 3x servo connectors. Note that servos are not included.
  • XBee™ compatible socket (for ZigBee and WiFi modules). Note that RF module is not included.
  • LPC1114 in DIL28 package, with 12MHz crystal and SWD connector (only for pcb mounting)
  • Local +3.3V voltage regulator
  • Miscellaneous resistors, capacitors, transistors and connectors
  • Breadboard with cables
  • Naked PCB




Kunden kauften auch

Raspberry Pi 1 Modell B (ARM11, 512MB RAM)

Raspberry Pi 1 Modell B (ARM11, 512MB RAM)

31,95 EUR

Pololu Basic SPDT Relais Bausatz (5VDC)

Pololu Basic SPDT Relais Bausatz (5VDC)

4,34 EUR

LPCXpresso Motor Control Kit

LPCXpresso Motor Control Kit

190,40 EUR

Piezo Vibrationssensor - klein horizontal

Piezo Vibrationssensor - klein horizontal

3,27 EUR

Platine mit Streifen RM2,54 100x160

Platine mit Streifen RM2,54 100x160

1,60 EUR

Empfohlenes Zubehör

LPC1769 LPCXpresso / LPCXpresso1769 mit CMSIS-DAP

LPC1769 LPCXpresso / LPCXpresso1769 mit CMSIS-DAP

23,80 EUR

LPC1114 LPCXpresso - ARM Cortex-M0 Board

LPC1114 LPCXpresso - ARM Cortex-M0 Board

23,80 EUR