MP1584 1-18V (3A) Step-Down Schaltregler

2,50 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0030 kg

Hersteller: HAOYU Electronics

Lagerbestand: 147

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Art.Nr.: 20150267
     

Produktbeschreibung

This DC/DC step-down voltage converter is based on MP1584, it converts input voltage between 4.5V and 28V into a smaller voltage between 0.8V and 18V, capable of driving a 3A load with excellent line and load regulation.

Note: Input must be >1.5V higher than output! The chip will jumper to high temperature protection mode when it work at a high-power conversion, without any cooling, it is able to output 3A current at 5V. But at higher output voltage, the current output capacity is lower than 3A, the minimum is 2A.

Feature


- Wide 4.5V to 28V Operating Input Range
- Up to 92% Efficiency
- Programmable Switching Frequency from 100kHz to 1.5MHz
- High-Efficiency Pulse Skipping Mode for Ceramic Capacitor Stable
- Internally Set Current Limit without a Current Sensing Resistor
- Cycle-by-Cycle Over Current Protection
- Input Under Voltage Lockout

Specification

- Input Voltage: 4.5V-28VDC
- Output Voltage: 0.8V-18VDC
- Continuous Output Current: Max. 3A
- Peek Output Current: 4A
- Max. Efficiency: 92%
- Output Ripple: <30mV
- Switching Frequency: 100kHz to 1.5MHz
- Operating Temperature: -40℃ to +85℃
- Dimensions: 22mm*17mm*4mm(l*w*h)

Documents

MP1584 Datasheet

Kunden kauften auch

Adafruit Bicolor LED Square Pixel Matrix with I2C Backpack

Adafruit Bicolor LED Square Pixel Matrix with I2C Backpack

17,43 EUR

RPi-Display B+ Flex Edition (für alle Raspberry Pi Modelle)

RPi-Display B+ Flex Edition (für alle Raspberry Pi Modelle)

34,95 EUR

Temperatur Sensor - Wasserdicht (DS18B20)

Temperatur Sensor - Wasserdicht (DS18B20)

10,89 EUR

Lithium Knopfzelle CR2032 3V (Renata)

Lithium Knopfzelle CR2032 3V (Renata)

0,90 EUR

CY8CKIT-059 Prototyping Kit

CY8CKIT-059 Prototyping Kit

12,95 EUR