NTSC/PAL TFT Display - 2.0" Diagonal

42,45 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0200 kg

Hersteller: Adafruit Industries

Lagerbestand: 0

Nicht auf Lager.

Nicht auf Lager.

Art.Nr.: ADA911
     

Produktbeschreibung

2,0" LCD mit einem NTSC/PAL Eingang.
Versorgungsspannung: 6-15V DC



Yes, this is an adorable miniature television! The visible display measures only 2.0" diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-15VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voila, a television display! There's a little button to adjust the LED backlight brightness (5 levels) - there is no other adjustment available but we found that the color and contrast look great right out of the box.

To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any analog composite-video output such as a YBox or Propeller w/Video out. It will not work with a device that only outputs VGA, HDMI or any other digital video signal.

Please note, these miniature displays are very delicate and require care to avoid ripping the delicate flex connector. These are best used by electronics geeks who have experience and are comfortable working with delicate electronic components. WE CANNOT REPLACE DAMAGED DISPLAYS if you are not careful and rip the flex connector!

Kunden kauften auch

DRV8833 Dual Motor Driver Carrier

DRV8833 Dual Motor Driver Carrier

5,95 EUR

TEK-BERRY Gehäuse - blau transparent

TEK-BERRY Gehäuse - blau transparent

5,00 EUR

Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685

Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685

16,47 EUR

Raspberry Pi Kamera mit CS Linse (OV5647)

Raspberry Pi Kamera mit CS Linse (OV5647)

33,32 EUR