OpAmp Breakout

5,36 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0100 kg

Hersteller: SparkFun

Lagerbestand: 0

Nicht auf Lager.

Nicht auf Lager.

Art.Nr.: BOB-09816
     

Produktbeschreibung

Kleines Breakout mit einem LMV358 Operationsverstärker.

This is a simple Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the signal level between the stages, not the feedback path. The bandwidth is set to 15.9kHz by a pair of feedback capacitors, or over 100kHz with the caps removed. The LMV358 opamp can source up to 160mA and works well as a low impedance driver/buffer.

Documents:

Replaces: BOB-08704


Kunden kauften auch

TI MSP430G2553IN20 (DIP20)

TI MSP430G2553IN20 (DIP20)

Nur 1,19 EUR Statt 2,38 EUR

Testkabel / Jumper Wires F/F 300mm

Testkabel / Jumper Wires F/F 300mm

2,98 EUR

Breadboard 830 Pin transparent

Breadboard 830 Pin transparent

5,49 EUR - 5,25 EUR

Proto-Shield R3 PCB (Arduino)

Proto-Shield R3 PCB (Arduino)

3,57 EUR

Testkabel / Jumper Wires M/M 100mm (für Breadboards)

Testkabel / Jumper Wires M/M 100mm (für Breadboards)

2,75 EUR