P8X32A Propeller QuickStart (Rev. B)

23,80 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0330 kg

Hersteller: Parallax

Lagerbestand: 0

Nicht auf Lager.

Nicht auf Lager.

Art.Nr.: 40000
     

Produktbeschreibung

Das Parallax P8X32A QuickStart Board ist ein OpenSource Entwicklungskit für den Parallax Propeller. Auf dem Board befindet sich gleich ein USB seriell Wandler zur einfachen Programmierung und Versorgung über die USB Schnittstelle eines Computers.


The QuickStart is an evaluation board for the Propeller. As an open-source reference design the QuickStart board provides basic Propeller circuitry. Developers may use our PCB layout files as their own to speed their project towards completion. As a project board the QuickStart is fully expandable and provides unimpeded access to all I/O pins through an expansion header but includes some button inputs and LEDs to demonstrate programming. With USB power and a selection of QuickStart Project examples it's also the fastest way to get up and running. 

Examples at Parallax Semiconductor:
QuickStart 1: Comparison of Programming Tools
QuickStart 2: Propeller Programming First Steps
QuickStart 3: Introduction to Spin Objects
QuickStart 4: Common Methods Found in Objects
QuickStart 5: Multiple Cogs
QuickStart 6: Using the Parallax Serial Terminal

Features:

  • Open hardware reference design through our Altium and DipTrace PCB layout files (more export options may be possible)
  • Bus-powered USB coupled with 3.3V regulator for 500 mA
  • 5 mHz cyrstal on board may be disabled by removing SMT jumper, allowing replacement with external through-hole crystal
  • 64KB EEPROM (32K for P8X32A program, 32K for general-purpose use)
  • External brownout reset may be installed by removing SMT jumper
  • (8) blue LEDs on P16-P23
  • (8) resistive touch-buttons on P0-P7
  • Pads for sigma-delta A/D circuitry (two resistors and two capacitors, both 0603) for using the Sigma-Delta A/D AppNote
  • Expansion header provides access to Vss, Vdd, 32 I/O pins (28 for any use, 2 are I2C bus, and two are optional Tx/Rx if connected to USB power)
  • Measures 2" x 3" (5.1 cm x 7.6 cm)



Kunden kauften auch

Pololu 3.3V Step-Up/Step-Down Schaltregler S7V8F3

Pololu 3.3V Step-Up/Step-Down Schaltregler S7V8F3

6,66 EUR

Wattuino Nanite 85 (ATtiny85 mit USB Bootloader)

Wattuino Nanite 85 (ATtiny85 mit USB Bootloader)

6,00 EUR

Breadboard 750 Pin

Breadboard 750 Pin

4,76 EUR

FTDI Breakout v1 (FT232)

FTDI Breakout v1 (FT232)

12,00 EUR - 9,52 EUR

Shield-LoL-5mm Rot

Shield-LoL-5mm Rot

18,98 EUR