Parallax USB2SER Development Tool

19,95 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0500 kg

Hersteller: Parallax

Lagerbestand: 0

Nicht auf Lager.

Nicht auf Lager.

Art.Nr.: 20091129


Alternativartikel: FTDI-Breakout-Reloaded-V11

Parallax USB Seriell Wandler zur Programmierung der Parallax Microcontroller über die USB Schnittstelle eines Computers.

Vollständige Englische Beschreibung und Treiber Downloads:

Parallax created this development tool in order to provide developers using five volt microcontroller (like our BASIC Stamp series) to have easy access to a PC’s USB port using the FTDI virtual device drivers. This tool is also a reference design for customer applications using the FTDI chip in-circuit. Download the documentation for the Bill of Materials, schematics and pictorial diagrams of the USB2SER Adapter.


  • USB power, no external supply required
  • Four-pin female SIP connector with 0.1" spacing to interface to the microcontroller circuit
  • Red and blue LEDs to indicate TX and RX activity
  • Supports standard and custom baud rates, 300 baud to 3 Mbaud

Key Specifications:

  • Power requirements: 5 VDC, up to 90 mA, from USB connection
  • Communication: Full speed USB, full duplex 5 V non-inverted TTL serial from 300 baud to 3 Mbaud
  • Dimesnions: 1.25 x 0.47 x 0.29 in (31.8 x 12 x 7.4 mm)
  • Operating Temperature: -40 to +185°F (-40 to +85°C)

Downloads  & Resources:
USB2SER Rev A Documentation (.pdf)
USB2SER Rev B and C Documentation (.pdf)
FTDI Schematics (off site)

Kunden kauften auch

MI0283QT Adapter v1 (inkl. 2.8

MI0283QT Adapter v1 (inkl. 2.8" LCD + Touchpanel)

30,00 EUR - 28,00 EUR

Pegelwandler 4-Kanal

Pegelwandler 4-Kanal

2,00 EUR