Pololu 5V Step-Up Wandler NCP1402

Produktbeschreibung

Dieses Breakout mit dem NCP1402 wandelt aus einer Spannung von 0,8 - 5 Volt eine Gleichspannung von 5V mit einem maximaler Ausgangsstrom von 200mA. Die 200mA sind ab einer Eingangsspannung von 2,7 Volt möglich.

This extremely compact boost regulator generates 5 V from voltages as low as 0.8 V and delivers up to 200 mA, making it perfect for powering small 5V electronics projects from 1 to 3 NiMH, NiCd, or alkaline cells or from a single lithium-ion cell.

Overview

This tiny boost switching regulator is based on the NCP1402 boost regulator IC. Its small dimensions of just 0.33" x 0.5" (8.4 x 12.7 mm) and a startup voltage of down to 0.8 V make it easy to build 5 V circuits that are powered by lower battery voltages. The available output current and output voltage ripple depend on the input voltage. With a 0.8 V input, approximately 5 mA are available before the output voltage begins dropping. The full 200 mA output can be realized from input voltages over approximately 2.7 V. With low input voltages, the output voltage ripple is under 40 mV peak-to-peak; close to 5 V, the output ripple quickly climbs to 150 mV peak-to-peak. Therefore, adding capacitance from the output to ground is recommended for noise-sensitive applications with input voltages close to 5 V.

Some example applications include:

• Powering 5 V systems from lower-voltage batteries.
• Powering 5 V subsystems (e.g. sensors) in lower-voltage (e.g. 3.3 V) systems.

Using the Boost Regulator

The boost regulator has just three connections: the input voltage, ground, and the output voltage. These three connections are labeled on the back side of the PCB, and they are arranged with a 0.1" spacing along the edge of the board for compatibility with standard solderless breadboards and perfboards and connectors that use a 0.1" grid. You can solder wires directly to the board or solder in either the 3×1 straight male header strip or the 3×1 right-angle male header strip that is included.

Feature summary

• operating voltage: 0.8 V to 5.0 V
• 5.0 V output with 2.5% accuracy
• small size: 8.4 x 12.7 x 3.8 mm (0.33" x 0.50" x 0.15")
• weight without header pins: 0.6 g (0.02 oz)