Pololu Micro Serial Servo Controller (partial kit)

18,45 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0020 kg

Hersteller: Pololu

Lagerbestand: 0

Nicht auf Lager.

Nicht auf Lager.

Art.Nr.: 208
     

Produktbeschreibung

Der Pololu Micro Serial Controlle ist ein kompakter 8-Kanal Servo Controller, er kann via RS232 oder per serielle Schnittstelle direkt an einen Mikrocontroller angeschlossen werden.

Der Controller verfügt über eine automatische Baudraten Erkennung (1200-38400), drei LEDs informieren über den genauen Status des Controllers.

Technische Daten:
  • PCB size: 23x23mm
  • Servo ports: 8
  • Resolution: 0.5 µs (about 0.05°)
  • Range: 250-2750 µs
  • Logic supply voltage: 5-16 V
  • Data voltage: 0 and 5 V
  • Pulse rate: 50 Hz
  • Serial baud rate: 1200-38400 (automatically detected)
  • Current consumption: 5 mA (average)



This version of the micro serial servo controller is packaged as a partial kit in which the surface-mounted components are already assembled. Male header pins are included, but you can also connect your servos directly to the PCB if space or weight are a concern.

The Pololu micro serial servo controller (SSC) is a very compact solution for controlling up to eight radio control (RC) servos from a computer or microcontroller. The controller measures just 0.91" x 0.91", yet it is one of the most full-featured servo controllers available. Each servo speed and range can be controlled independently, the baud rate is detected automatically over a 1200-38400 bps range, and multiple units can be daisy-chained on one serial line to control up to 128 servos. Three status LEDs and an integrated level converter for RS-232 applications get you up and running quickly. The micro serial servo controller is dwarfed by even a standard servo, but it can control any standard RC servo, including giant 1/4-scale servos.

The micro serial servo controller is available in two configurations: fully assembled with all connector pins, as shown in the main product pictures, and as a partial kit. The kit, shown to the left, has all of the surface-mounted components assembled. You can save some money and solder in the included pins yourself, or you can leave them out altogether and solder in your servos directly for a really compact installation.

This servo controller supports two separate communication protocols. One protocol is compatible with our other serial servo controllers and our serial motor controllers, and it offers individual range and speed control for each servo. This servo controller is also compatible with the Scott Edwards MiniSSC II servo controller and any software written for it.

The servo controller is less than half the size and price of most 16-channel servo controllers. This means that the micro servo controller is an ideal solution even if you need to control more than eight servos, as in the case of a six-legged walking robot. Having multiple smaller controllers means less of a wiring mess since servos in one section of the robot can be connected to a more local controller.

The back side of the board has all of the ports labelled, and two mounting holes allow you to secure the controller to your project. The logic supply and the servo supply can be tied together for single-battery operation, or the on-board voltage regulator allows the logic supply to be as high as 16V.

The Pololu micro servo controller is available fully assembled, or as a partial kit that requires soldering of the through-hole male header pins, which are included in the kit. To use the micro servo controller in robotics projects, you need to connect it to your own servos and main robot controller.

Device specifications

  • PCB size: 0.91" x 0.91"
  • Servo ports: 8
  • Resolution: 0.5 µs (about 0.05°)
  • Range: 250-2750 µs
  • Logic supply voltage: 5-16 V
  • Data voltage: 0 and 5 V
  • Pulse rate: 50 Hz
  • Serial baud rate: 1200-38400 (automatically detected)
  • Current consumption: 5 mA (average)


Documentation and other information

Pololu Serial Transmitter utility for Windows
(Printable PDF: pololu_serial_transmitter.pdf)

A simple serial transmitter utility for Windows that lets you transmit sequences of bytes at a selectable baud rate to a selectable COM port. This program can be conveniently used to send commands to our serially controllable devices.

File downloads

Micro serial servo controller user’s guide (238k pdf)
Using the Pololu Servo Controller with the BASIC Stamp 2 (59k pdf)

Recommended links

Tutorial: Using the Pololu Servo Controller in .NETCustomer Colin Karpfinger has written a tutorial complete with sample C# program that demonstrates how to interface with Pololu servo controllers using .NET.

Python interface to the Pololu 8-channel servo controllerExample code showing how to use the controller under Linux in the Python programming language.

ROB-08897




Kunden kauften auch

Drehencoder mit Taster PEC12R-4225F-S0024

Drehencoder mit Taster PEC12R-4225F-S0024

1,59 EUR

XBee Explorer USB

XBee Explorer USB

27,49 EUR

Mega mSD-Shield v1

Mega mSD-Shield v1

19,49 EUR

Adafruit USB Seriell Adapterkabel

Adafruit USB Seriell Adapterkabel

10,57 EUR

Testkabel / Jumper Wires F/M 100mm

Testkabel / Jumper Wires F/M 100mm

2,75 EUR