Pololu Qik 2s9v1 Dual Motorsteuerung

27,25 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0200 kg

Hersteller: Pololu

Lagerbestand: 19

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Art.Nr.: 1110
     

Produktbeschreibung

Der Pololu Qik 2s9V1 ist ein seriell steuerbarer DC Motor-Controller für zwei Motor.
Der Controller hat einen Versorgungsspannungsbereich von 4,5 - 13,5V, je Kanal ist ein Strom von 1A (kurzeitig 3A) möglich.


Vollständige englische Beschreibung:

The qik 2s9v1 is Pololu’s second-generation dual serial motor controller. The compact module allows any microcontroller or computer with a serial port (external RS-232 level converter required) or USB-to-serial adapter  to easily drive two small, brushed DC motors with full direction and speed control. It provides ultrasonic, 8-bit PWM speed control via an advanced, two-way serial protocol that features automatic baud rate detection up to 38.4 kbps and optional CRC error checking. Two status LEDs give visual feedback about the serial connection and any encountered error conditions, making debugging easy, and a demo mode allows easy verification of proper operation.

The improvements over the previous generation and competing products include:

  • high-frequency (ultrasonic) PWM to eliminate switching-induced motor shaft hum or whine
  • a robust, high-speed communication protocol with user-configurable error condition response
  • visible LEDs and a demo mode to help troubleshoot problematic installations
  • reverse power protection on the motor supply (not on the logic supply)
Main features:
  • Simple bidirectional control of two DC brush motors; please see the user’s guide for more information.
  • 4.5 V to 13.5 V motor supply range.
  • 1 A maximum continuous current per motor (3 A peak).
  • 2.7 V to 5.5 V logic supply range.
  • Logic-level, non-inverted, two-way serial control for easy connection to microcontrollers or robot controllers.
  • Optional automatic baud rate detection.
  • Two on-board indicator LEDs (status/heartbeat and serial error indicator) for debugging and feedback.
  • Serial error output to make it easier for the main controller to recover from a serial error condition.
  • Jumper-enabled demo mode allows initial testing without any programming.
  • Optional CRC error detection eliminates serial errors caused by noise or software faults.
  • Optional motor shutdown on serial error or timeout for additional safety.
  • Supports daisy-chaining the qik to other qiks and Pololu serial motor and servo controllers, allowing the control of up to hundreds of motors and servos with a single serial line.
Motor driver: TB6612FNG
Motor channels: 2
Control interface: non-inverted TTL serial2
Minimum operating voltage: 4.5 V
Maximum operating voltage: 13.5 V
Continuous output current per channel: 1 A
Peak output current per channel: 3 A
Maximum PWM frequency: 32 kHz3
Minimum logic voltage: 2.7 V
Maximum logic voltage: 5.5 V
Reverse voltage protection?: Y4

Notes:

1 Without included hardware.
2 Autodetects baud rates between 1200 and 38,400 bps, or can be set for a fixed 38,400 bps baud rate.
3 Can also be configured to use 15.7 kHz, 7.8 kHz, or 3.9 kHz PWM frequencies.
4 On motor voltage only; logic voltage does not have reverse protection.




Kunden kauften auch

ShiftBar - RGB LED Controller

ShiftBar - RGB LED Controller

8,00 EUR

Stapelbare Buchsenleisten (für Arduino Shields)

Stapelbare Buchsenleisten (für Arduino Shields)

1,79 EUR

LiPo Lader Basic - Mini-USB

LiPo Lader Basic - Mini-USB

8,45 EUR

16x2 LCD orange auf schwarz (serielle Ansteuerung 3.3V)

16x2 LCD orange auf schwarz (serielle Ansteuerung 3.3V)

0,00 EUR

7-Segment LED Anzeige blau (seriell)

7-Segment LED Anzeige blau (seriell)

14,16 EUR