Propeller C3

107,10 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.1000 kg

Hersteller: Parallax

Lagerbestand: 20

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Art.Nr.: 32209
     

Produktbeschreibung

Das C3 Board (Credit-Card–sized Computer) von Parallax ist in Zusammenarbeit von Parallax, Nurve Networks LLC und André LaMothe entwickelt wurden.

Es bietet zahlreiche nützliche Features:

  • Multicore Propeller P8X32A-Q44 with 5.00 MHz socketed crystal to upgrade for over-clocking experiments
  • 64 KB Propeller boot EEPROM holds boot image plus 32 KB extra for data
  • Supports USB or external wall adapter power sources
  • Dual high-current 1.5 A, 3.3/5 V voltage regulators with heavy filtering
  • VGA port with multiplexing logic to reuse IO’s
  • RCA Video/Audio ports for NTSC/PAL composite video
  • PS/2 port for keyboard or mouse
  • 1 MB SPI FLASH memory
  • 2-channel Microchip MCP3202 SPI A/D converter with 12-bit resolution
  • (2) Microchip 32K x 8 bit SPI SRAMs
  • MicroSD card w/SPI interface





  • The C3 is a true “Credit-Card–sized Computer” that augments the Propeller chip with a number of onboard peripherals to facilitate large scale and complex applications.

    Designed in cooperation with Nurve Networks LLC and André LaMothe, the Propeller C3 is the newest Propeller-based application platform from Parallax. Ready to support a wide array of peripherals, this system is ideal for industrial control, monitoring systems, high-level languages, robotics, gaming, and more.

    The C3 was designed to be compatible with other Propeller-based development boards such as the Propeller Demo Board and the HYDRA, so porting applications is a snap. Additionally, the C3 uses a novel SPI bus design that allows all the onboard peripherals to be accessed with a single SPI bus (3 signals) along with chip-select logic (2 signals) that supports up to 8 devices in total. Thus, the IO impact of all the onboard peripherals is minimal.

    Features:

    • Multicore Propeller P8X32A-Q44 with 5.00 MHz socketed crystal to upgrade for over-clocking experiments
    • 64 KB Propeller boot EEPROM holds boot image plus 32 KB extra for data
    • Supports USB or external wall adapter power sources
    • Dual high-current 1.5 A, 3.3/5 V voltage regulators with heavy filtering
    • VGA port with multiplexing logic to reuse IO’s
    • RCA Video/Audio ports for NTSC/PAL composite video
    • PS/2 port for keyboard or mouse
    • 1 MB SPI FLASH memory
    • 2-channel Microchip MCP3202 SPI A/D converter with 12-bit resolution
    • (2) Microchip 32K x 8 bit SPI SRAMs
    • MicroSD card w/SPI interface
    • 2 x 16 headers exporting generous IO and system signals
    • (4) 3-wire servo port headers to directly drive servos from the Propeller
    • Ultra-compact credit-card–sized PCB footprint: 3 x 2.175 in (75.9 x 55.2 mm)
    • (4) Break-away mounting tabs, removable if not needed
    • Open source hardware & software design
    • Slick black and white industrial design sure to be the envy of all your friends.

    Application Ideas:

    • Industrial control
    • Monitoring systems
    • Gaming
    • Experimentation

    Key Specification:

    • Power requirements: 7.5–12 VDC, 300+ mA 2.1mm center-positive supply; OR power via high-power USB, hub port preferred
    • Communication/Interface: USB, GPIO, microSD card
    • Dimensions (without tabs): 3.0 x 2.175” (75.9 x 55.2 mm)
    • Operating temp range: -40 to +185 °F (-40 to +85 °C)

    Caution: Do Not connect to USB and external power at the same time.


    Downloads & Resources:
    Propeller C3 Product Documentation (.pdf)
    Unleashing the Prop C3 ebook (.pdf)
    Source Files (ftp)



    Kunden kauften auch

    7-Segment LED Anzeige gelb (seriell)

    7-Segment LED Anzeige gelb (seriell)

    14,16 EUR

    Ersatz Ball Caster mit 12,7mm Kunstoffkugell (3pi)

    Ersatz Ball Caster mit 12,7mm Kunstoffkugell (3pi)

    2,39 EUR

    P8X32A Propeller QuickStart  (Rev. B)

    P8X32A Propeller QuickStart (Rev. B)

    23,80 EUR

    Arduino Pro 328 - 3.3V/8MHz

    Arduino Pro 328 - 3.3V/8MHz

    16,17 EUR