Raspberry Pi Kamera NoIR CS Linse (OV5647)

37,66 EUR

incl. 19 % USt zzgl. Versandkosten

Lagerbestand: 0

Nicht auf Lager.

Nicht auf Lager.

Art.Nr.: 20110927
     

Produktbeschreibung

The Pi NoIR is a Raspberry Pi camera module with no Infrared filter for night time and low light photography using an Infrared light. Useful for wildlife research, science projects, night time security or making artistic photo’s.
The Raspberry Pi camera module has been used for many things such as a security camera, for time lapse photography and even sent high up into the atmosphere on a weather balloon.
With the wide range of project Raspberry Pi’s are being used for, some users were finding that the camera was no good when it was being used in low light with an Infrared light source. Unfortunately for them the Raspberry Pi camera module has a Infrared filter built in which makes it unusable for their project. In response we come up with a camera module just for these type of projects called the Pi NoIR camera. It is the same as the standard camera module but without an IR filter.
Without the Infrared filter the camera can be used for night time photography, night time security or for any project where the scene will be lit by an IR light. Without a filter the camera sensor can see short wavelength IR light around 800nm which is the IR wavelengths not generated with heat but just beyond the visible red light in the spectrum.
The camera has the same specifications as the standard camera module but has a black circuit board so it can be told apart from the standard green camera board.

Features:

    *Raspberry Pi HD Camera
    *High-Definition video camera for Raspberry Pi Model A or B.
    *Omnivision 5647 sensor in a fixed-focus module with replaceable Lense
    *Lens holder: M12x0.5 or CS Mount
    *5MPixel sensor
    *Removed IR filter
    *Still picture resolution: 2592 x 1944
    *Max video resolution: 1080p
    *Max frame rate: 30fps
    *Size: 36 x 36 mm


 Package Include:

    *1pcs Raspberry Pi NoIR Camera Board
    *1pcs 15cm 15-pin flat ribbon cable


Kunden kauften auch

TEK-BERRY Gehäuse - transparent v1.2 (mit Ausschnitt für RPi-Display)

TEK-BERRY Gehäuse - transparent v1.2 (mit Ausschnitt für RPi-Display)

8,59 EUR

Raspberry Pi 2 Modell B - ARM Cortex-A7 Quad-Core 900MHz 1GB RAM

Raspberry Pi 2 Modell B - ARM Cortex-A7 Quad-Core 900MHz 1GB RAM

38,95 EUR

Teensy v3.1 USB Board - MK20DX256 ARM Cortex-M4

Teensy v3.1 USB Board - MK20DX256 ARM Cortex-M4

21,84 EUR

Stapelbare Buchsenleisten (für Arduino Shields)

Stapelbare Buchsenleisten (für Arduino Shields)

1,79 EUR

31mm Gummirad für 3mm Wellen

31mm Gummirad für 3mm Wellen

4,28 EUR

Empfohlenes Zubehör

Raspberry Pi Kamera Anschlusskabel - 50cm

Raspberry Pi Kamera Anschlusskabel - 50cm

2,98 EUR

Raspberry Pi Kamera Anschlusskabel - 1m

Raspberry Pi Kamera Anschlusskabel - 1m

4,52 EUR

Raspberry Pi Kamera Anschlusskabel - 2m

Raspberry Pi Kamera Anschlusskabel - 2m

6,55 EUR