ST7565 Positive GLCD (128x64) with RGB backlight

19,64 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.5300 kg

Hersteller: Adafruit Industries

Lagerbestand: 1

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Art.Nr.: ADA250
     

Produktbeschreibung

This graphical display looks great, costs less! The dark gray pixels are visible in daylight, and there's also a full RGB LED backlight, which you can control with PWM to make any color you can imagine.

Four mounting holes and a blank 11 pin 2mm-pitch labeled breakout on the side - we just soldered some wire to each hole as shown in the photos, its very easy. (The LCDs have no wires soldered in when we ship them)

Bonus! We're including a free 4050 level shifter chip so that you can safely use it with your favorite 5V microcontroller

Advantages!
  • Lower cost than KS0108 LCDs
  • Serial interface uses only 4 or 5 digital pins
  • Low power, full-color RGB LED backlight
  • Visible in daylight without backlight
  • Works perfectly with 3V logic
Challenges!...
  • 3.3v power and logic means a level converter is needed for 5V Arduinos (we include this part when purchasing from us)
  • Microcontroller must buffer display - uses 1Kb of RAM. This means you must upgrade to a ATmega328 if you are using an Arduino with a '8 or '168
For a more detailed tutorial, including how to wire up the display with a 4050, see our writeup at http://www.ladyada.net/learn/lcd/st7565.html

We have C code and an Arduino library ready to go (we suggest reading the above tutorial too!)

Kunden kauften auch

16x2 LCD weiß auf schwarz (serielle Ansteuerung 3.3V)

16x2 LCD weiß auf schwarz (serielle Ansteuerung 3.3V)

26,99 EUR

Basismaterial 100x160mm - 2x35µm FR4 0,8mm

Basismaterial 100x160mm - 2x35µm FR4 0,8mm

2,80 EUR - 2,70 EUR

PIR Bewegungsmelder (JST)

PIR Bewegungsmelder (JST)

10,76 EUR