STM32F103TBU6 ARM Cortex-M3 Development Board

4,65 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0040 kg

Hersteller: HAOYU Electronics

Lagerbestand: 140

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Art.Nr.: 20150235
     

Produktbeschreibung

HY-TinySTM103T is entry level development board for the ARM Cortex M3 family of devices produced by ST Microelectronics Inc. With HY-TinySTM103T you can explore the features of STM32 family on budget, the board have everything necessary to build simple applications: USB port where power is taken and power supply circuit, reset and oscillator circuits, SWD/ISP for programming and debugging, one status LEDs and reset button.

Although very simple this board will allow you to easily build USB application like PC mouse, USB mass storage device, USB Audio class device, USB to Virtual RS232 port. There are plenty of GPIOs on extension headers where you can connect your additional circuits.

Important, SWD interface subject to schematic, not PCB screen printing. ISP PIN order is GND, SWCLK, SWDIO, UART1-RX, UART1-TX, 3.3V.

Features

    CPU: STM32F103TBU6 ARM 32 bit Cortex-M3
    On-Chip Memory: 128KB Flash & 64KB RAM
    12pin FPC connector to LCD modules ( RPI-SPI-32LCD & RPI-SPI-28LCD )
    Micro USB connector
    ISP button
    RESET button
    status LED
    power supply LED
    on board voltage regulator 3.3V with up to 300mA current
    single power supply: takes power from USB port or extension connector pin
    8Mhz crystal oscillator
    extension headers for all microcontrollers pins
    Dimensions: 31.9 × 21.3mm
    Distance between the extension connectors: 2.54 mm (1")

Kunden kauften auch

Lötlack grün 150ml

Lötlack grün 150ml

12,95 EUR - 12,20 EUR

STM32F030F4P6 ARM Cortex-M0 Development Board

STM32F030F4P6 ARM Cortex-M0 Development Board

4,25 EUR

RPi-FabScan-HAT für FabScan Pi 3D Scanner Projekt

RPi-FabScan-HAT für FabScan Pi 3D Scanner Projekt

25,00 EUR

Wattuino Uno Bausatz

Wattuino Uno Bausatz

19,00 EUR - 16,00 EUR

Simple Case für Raspberry Pi Zero - transparent

Simple Case für Raspberry Pi Zero - transparent

3,50 EUR