Xverve Signalyzer H2 ARM JTAG Starter Kit

Gewicht: 0.1000 kg

Lagerbestand: 0

Nicht auf Lager.

Nicht auf Lager.

Art.Nr.: K-USB-ARM-20-JTAG


Der Signalyzer ist ein USB Tool, welches als JTAG Intferface oder als USB -  SPI, I2C, UART Bridge genutzt werden kann.

Hierbei handelt es sich um ein Komplettset inkl.

  • Signalyzer H2
  • ARM JTAG Modul (Pegelwandler (2-5,5V, Powersupply 1-4,75Vmax. 500mA)
  • USB Kabel
  • 20 Pin JTAG Kabel

Signalyzer ARM JTAG Starter Kit. All you need to interface to a standard ARM 20-pin JTAG target device or board.

The kit package contains:

Signalyzer H2 Features and Specifications

  • Modular design approach for most flexibility
  • USB powered
  • USB 2.0 High Speed ( USB 2.0 up-to 480Mbit/sec)
  • Dimensions: 45mm x 40mm x 13mm
  • 2 independent configurable channels
  • Up to 22 configurable GPIO lines per side
  • 5VDC output with soft start, overcurrent and thermal protection (requires powered USB hub)
  • Supports most popular Serial Protocols ( SPI, JTAG, I2C, UART ), support for additional protocols may be realized with Bit-bang modes.
  • JTAG TCK up-to 30MHz with true RTCK support.
  • Parallel interface modes of operation including High-speed FIFO, Asynchronous and Synchronous Bit-bang modes.
  • 3 user controllable bi-color LEDs (RED / GREEN)
  • 2 10-bit ADC Input per side
  • 1 PWM output per side
  • I2C bus for Accessory modules control and configuration
  • GPIO is 3.0V - 5.0V capable. (GPIO voltage range can be expanded with use of variety of Accessory modules and can be expanded to 1.15V - 5.5V or fully isolated mode)
  • 100mA power consumtion (without external connections or modules)
  • Expandable with range of Accessory Modules
  • Accessory Module type detection
  • Field upgradeable firmware
  • Two IDC 0.1" 26-pin dual row connectors.

ARM JTAG 20pin Level Translating Adapter Specifications

  • Target voltage range: 1.65VDC - 5.5VDC
  • 24mA output drivers
  • JTAG TCK up-to 30MHz
  • RTCK signal support
  • ESD Protection Exceeds JESD 22
    – 2000-V Human-Body Model
    – 200-V Machine Model
    – 1000-V Charged-Device Mode

Compatible software

Kunden kauften auch

RFID Starter Kit

RFID Starter Kit

54,56 EUR

Lötzinn 0,5mm Sn95Ag4Cu1 100g (bleifrei)

Lötzinn 0,5mm Sn95Ag4Cu1 100g (bleifrei)

15,47 EUR

Arduino Mini

Arduino Mini

22,50 EUR

MI0283QT Adapter v1 (inkl. 2.8

MI0283QT Adapter v1 (inkl. 2.8" LCD + Touchpanel)

30,00 EUR - 28,00 EUR