Xverve Signalyzer H2 ARM JTAG Starter Kit

Gewicht: 0.1000 kg

Lagerbestand: 0

Nicht auf Lager.

Nicht auf Lager.

Art.Nr.: K-USB-ARM-20-JTAG


Der Signalyzer ist ein USB Tool, welches als JTAG Intferface oder als USB -  SPI, I2C, UART Bridge genutzt werden kann.

Hierbei handelt es sich um ein Komplettset inkl.

  • Signalyzer H2
  • ARM JTAG Modul (Pegelwandler (2-5,5V, Powersupply 1-4,75Vmax. 500mA)
  • USB Kabel
  • 20 Pin JTAG Kabel

Signalyzer ARM JTAG Starter Kit. All you need to interface to a standard ARM 20-pin JTAG target device or board.

The kit package contains:

Signalyzer H2 Features and Specifications

  • Modular design approach for most flexibility
  • USB powered
  • USB 2.0 High Speed ( USB 2.0 up-to 480Mbit/sec)
  • Dimensions: 45mm x 40mm x 13mm
  • 2 independent configurable channels
  • Up to 22 configurable GPIO lines per side
  • 5VDC output with soft start, overcurrent and thermal protection (requires powered USB hub)
  • Supports most popular Serial Protocols ( SPI, JTAG, I2C, UART ), support for additional protocols may be realized with Bit-bang modes.
  • JTAG TCK up-to 30MHz with true RTCK support.
  • Parallel interface modes of operation including High-speed FIFO, Asynchronous and Synchronous Bit-bang modes.
  • 3 user controllable bi-color LEDs (RED / GREEN)
  • 2 10-bit ADC Input per side
  • 1 PWM output per side
  • I2C bus for Accessory modules control and configuration
  • GPIO is 3.0V - 5.0V capable. (GPIO voltage range can be expanded with use of variety of Accessory modules and can be expanded to 1.15V - 5.5V or fully isolated mode)
  • 100mA power consumtion (without external connections or modules)
  • Expandable with range of Accessory Modules
  • Accessory Module type detection
  • Field upgradeable firmware
  • Two IDC 0.1" 26-pin dual row connectors.

ARM JTAG 20pin Level Translating Adapter Specifications

  • Target voltage range: 1.65VDC - 5.5VDC
  • 24mA output drivers
  • JTAG TCK up-to 30MHz
  • RTCK signal support
  • ESD Protection Exceeds JESD 22
    – 2000-V Human-Body Model
    – 200-V Machine Model
    – 1000-V Charged-Device Mode

Compatible software

Kunden kauften auch

MI0283QT Adapter v1 (inkl. 2.8

MI0283QT Adapter v1 (inkl. 2.8" LCD + Touchpanel)

30,00 EUR - 28,00 EUR

Flyswatter - ARM 20-Pin JTAG Adapter Kit

Flyswatter - ARM 20-Pin JTAG Adapter Kit

Nur 15,47 EUR Statt 20,19 EUR

Beagleboard-xM Gehäuse

Beagleboard-xM Gehäuse

Nur 29,75 EUR Statt 45,63 EUR

iPod Connector Male Style 2

iPod Connector Male Style 2

3,57 EUR