Xverve Signalyzer H4 ARM JTAG

71,40 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0050 kg

Lagerbestand: 0

Nicht auf Lager.

Nicht auf Lager.

Art.Nr.: DT-USB-SH4
     

Produktbeschreibung

Der Signalyzer ist ein USB Tool, welches als JTAG Intferface oder als USB -  SPI, I2C, UART Bridge genutzt werden kann.

Hierbei handelt es sich nur um den Signalyzer H2, es ist kein Kabel oder Pegelwandler im Lieferumfang.


Signalyzer H series is the next generation of our versatile Signalyzer Tool. Two fully independent and configurable channels provide support for most popular serial protocols (JTAG, SPI, I2C, UART), parallel asynchronous and synchronous interfaces, bit-bang mode. With the modularity in design and the continuously growing range of the Accessory modules Signalyzer-H2 is ready for the most challenging tasks in broad range of applications.

Features and Specifications

  • Modular design approach for most flexibility
  • USB powered
  • USB 2.0 High Speed ( USB 2.0 up-to 480Mbit/sec)
  • Dimensions: 45mm x 40mm x 13mm
  • 2 independent configurable channels
  • Up to 22 configurable GPIO lines per side
  • 5VDC output with soft start, overcurrent and thermal protection (requires powered USB hub)
  • Supports most popular Serial Protocols ( SPI, JTAG, I2C, UART ), support for additional protocols may be realized with Bit-bang modes.
  • JTAG TCK up-to 30MHz with true RTCK support.
  • Parallel interface modes of operation including High-speed FIFO, Asynchronous and Synchronous Bit-bang modes.
  • 3 user controllable bi-color LEDs (RED / GREEN)
  • 2 10-bit ADC Input per side
  • 1 PWM output per side
  • I2C bus for Accessory modules control and configuration
  • GPIO is 3.0V - 5.0V capable. (GPIO voltage range can be expanded with use of variety of Accessory modules and can be expanded to 1.15V - 5.5V or fully isolated mode)
  • 100mA power consumtion (without external connections or modules)
  • Expandable with range of Accessory Modules
  • Accessory Module type detection
  • Field upgradeable firmware
  • Two IDC 0.1" 26-pin dual row connectors.

OEM Features

  • Security and Authentication features utilizing 128-bit crypto engine (Licensing dongle)
  • Product customization and rebranding
  • Application specific modules and accesories

Compatible software

Modes of operation

  • Buffered UART with Flow Control signalling
  • JTAG Master Interface with TCK clock rate up-to 30MHz and true RTCK.
  • SPI Master Interface with maximum CLK speed up-to 30MHz
  • I2C Master Interface
  • Synchronouse FIFO
  • Asynchronous FIFO
  • Synchronous Bit-bang
  • Asynchronous Bit-bang
  • CPU Style FIFO
  • Host Bus Emulation mode (both sides combined)

Kunden kauften auch

Testkabel / Jumper Wires F/F 200mm

Testkabel / Jumper Wires F/F 200mm

2,75 EUR

Testkabel / Jumper Wires F/F 100mm

Testkabel / Jumper Wires F/F 100mm

2,75 EUR

Flyswatter - BeagleBoard Adapter Kit

Flyswatter - BeagleBoard Adapter Kit

21,29 EUR

Testkabel / Jumper Wires F/M 100mm

Testkabel / Jumper Wires F/M 100mm

2,75 EUR

Flyswatter - ARM 20-Pin JTAG Adapter Kit

Flyswatter - ARM 20-Pin JTAG Adapter Kit

20,19 EUR