Schrittmotor NEMA 23: Unipolar/Bipolar, 200 Steps 56x56mm, 3.6V, 2A

43,61 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.7200 kg

Hersteller: Pololu

Lagerbestand: 0

Nicht auf Lager.

Nicht auf Lager.

Art.Nr.: 1473
     

Produktbeschreibung

Unipolarer/Bipolarer Schrittmotor (NEMA 23) mit einer Auflösung von 200 Schritten


This high-torque hybrid stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 2 A at 3.6 V, allowing for a holding torque of 9 kg-cm (125 oz-in). The motor has six color-coded wires terminated with bare leads that allow it to be controlled by both unipolar and bipolar stepper motor drivers. When used with a unipolar stepper motor driver, all six leads are used. When used with a bipolar stepper motor driver, the center-tap yellow and white wires can be left disconnected (the red-blue pair gives access to one coil and the black-green pair gives access to the other coil). We recommend using it as a bipolar stepper motor.

Specifications

  • Size: 56.4 mm square × 56 mm, not including the shaft (NEMA 23)
  • Weight: 0.7 kg (25 oz)
  • Shaft diameter: 1/4″ (6.35 mm) “D”
  • Steps per revolution: 200
  • Current rating: 2 A per coil
  • Voltage rating: 3.6 V
  • Resistance: 1.8 Ohm per coil
  • Holding torque: 9 kg-cm (125 oz-in)
  • Inductance: 2.5 mH per coil
  • Lead length: 12 in

More specifications are available in the datasheet (49k pdf).

Dimensions

The following diagram shows the stepper motor dimensions in mm. The output D-shaft has a 0.25″ (6.35 mm) diameter with a section that is flattened by 0.5 mm (note: the diagram below incorrectly lists this flattened width as 6 mm when it is really 5.85 mm).

Stepper Motor Applications

Stepper motors are generally used in a variety of applications where precise position control is desirable and the cost or complexity of a feedback control system is unwarranted. Here are a few applications where stepper motors are often found:

  • Printers
  • CNC machines
  • 3D printer/prototyping machines
  • Laser cutters
  • Pick and place machines
  • Linear actuators
  • Hard drives


Kunden kauften auch

16x2 LCD weiß auf schwarz (serielle Ansteuerung 3.3V)

16x2 LCD weiß auf schwarz (serielle Ansteuerung 3.3V)

27,25 EUR

Motor Steuerung 25A IRF8734 (18v25) CS

Motor Steuerung 25A IRF8734 (18v25) CS

66,76 EUR

PVC-Schaltdraht YV 0,6/1,1 mm weiß - 100m

PVC-Schaltdraht YV 0,6/1,1 mm weiß - 100m

10,95 EUR

Servo Hitec HS-53 (112053)

Servo Hitec HS-53 (112053)

6,50 EUR

3-Achsen Schrittmotortreiber Shield für Arduino

3-Achsen Schrittmotortreiber Shield für Arduino

36,00 EUR