Schrittmotor NEMA 23: Unipolar/Bipolar, 200 Steps 56×56mm, 7.4V, 1A

43,61 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.7200 kg

Hersteller: Pololu

Lagerbestand: 6

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Art.Nr.: 1472
     

Produktbeschreibung

Unipolarer/Bipolarer Schrittmotor (NEMA 23) mit einer Auflösung von 200 Schritten


This high-torque hybrid stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 7.4 V, allowing for a holding torque of 9 kg-cm (125 oz-in). The motor has six color-coded wires terminated with bare leads that allow it to be controlled by both unipolar and bipolar stepper motor drivers. When used with a unipolar stepper motor driver, all six leads are used. When used with a bipolar stepper motor driver, the center-tap yellow and white wires can be left disconnected (the red-blue pair gives access to one coil and the black-green pair gives access to the other coil). We recommend using it as a bipolar stepper motor.

Specifications

  • Size: 56.4 mm square × 56 mm, not including the shaft (NEMA 23)
  • Weight: 0.7 kg (25 oz)
  • Shaft diameter: 1/4″ (6.35 mm) “D”
  • Steps per revolution: 200
  • Current rating: 1 A per coil
  • Voltage rating: 7.4 V
  • Resistance: 7.4 Ohm per coil
  • Holding torque: 9 kg-cm (125 oz-in)
  • Inductance: 10 mH per coil
  • Lead length: 12 in

More specifications are available in the datasheet (46k pdf).

Dimensions

The following diagram shows the stepper motor dimensions in mm. The output D-shaft has a 0.25″ (6.35 mm) diameter with a section that is flattened by 0.5 mm (note: the diagram below incorrectly lists this flattened width as 6 mm when it is really 5.85 mm).

Stepper Motor Applications

Stepper motors are generally used in a variety of applications where precise position control is desirable and the cost or complexity of a feedback control system is unwarranted. Here are a few applications where stepper motors are often found:

  • Printers
  • CNC machines
  • 3D printer/prototyping machines
  • Laser cutters
  • Pick and place machines
  • Linear actuators
  • Hard drives


Kunden kauften auch

SilentStepStick TMC2130 Schrittmotortreiber

SilentStepStick TMC2130 Schrittmotortreiber

10,95 EUR

Arduino Starter Kit (Englisch)

Arduino Starter Kit (Englisch)

95,08 EUR

Schrittmotor NEMA 8: Bipolar, 200 Steps, 20x30mm, 3.9V, 0.6A

Schrittmotor NEMA 8: Bipolar, 200 Steps, 20x30mm, 3.9V, 0.6A

19,64 EUR

Drucksensor - 12,7mm

Drucksensor - 12,7mm

7,62 EUR

FabScan-Shield for Schrittmotortreiber

FabScan-Shield for Schrittmotortreiber

10,00 EUR