Teensy v3.5 USB Board - ARM Cortex-M4

26,30 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0035 kg

Hersteller: PJRC

Lagerbestand: 0

Nicht auf Lager.

Nicht auf Lager.

Art.Nr.: 20160127
     

Produktbeschreibung

The Teensy USB Development Board is a complete USB-based microcontoller development system.

Version 3.5 features a 32 bit 120 MHz ARM Cortex-M4 processor with floating point unit. All digital pins are 5 volt tolerant.

All Teensy boards are shipped assembled and fully tested.

Features:
  • 120 MHz ARM Cortex-M4 with Floating Point Unit
  • 512K Flash, 192K RAM, 4K EEPROM
  • Microcontroller Chip MK64FX512VMD12 (PDF link)
  • 1 CAN Bus Port
  • 16 General Purpose DMA Channels
  • 5 Volt Tolerance On All Digital I/O Pins
  • 62 I/O Pins (42 breadboard friendly)
  • 25 Analog Inputs to 2 ADCs with 13 bits resolution
  • 2 Analog Outputs (DACs) with 12 bit resolution
  • 20 PWM Outputs (Teensy 3.6 has 22 PWM)
  • USB Full Speed (12 Mbit/sec) Port
  • Ethernet mac, capable of full 100 Mbit/sec speed
  • Native (4 bit SDIO) micro SD card port
  • I2S Audio Port, 4 Channel Digital Audio Input & Output
  • 14 Hardware Timers
  • Cryptographic Acceleration Unit
  • Random Number Generator
  • CRC Computation Unit
  • 6 Serial Ports (2 with FIFO & Fast Baud Rates)
  • 3 SPI Ports (1 with FIFO)
  • 3 I2C Ports (Teensy 3.6 has a 4th I2C port)
  • Real Time Clock


Kunden kauften auch

Pololu Ball Caster with 1/2

Pololu Ball Caster with 1/2" Plastic Ball

2,62 EUR

Adafruit Bicolor LED Square Pixel Matrix with I2C Backpack

Adafruit Bicolor LED Square Pixel Matrix with I2C Backpack

17,43 EUR

WS2812B - Intelligente RGB LED (10 Stk)

WS2812B - Intelligente RGB LED (10 Stk)

5,00 EUR

5V / 4A Netzteil (HNP24-050)

5V / 4A Netzteil (HNP24-050)

14,95 EUR

Testkabel / Jumper Wires F/M 200mm

Testkabel / Jumper Wires F/M 200mm

2,75 EUR