Teensy v3.6 USB Board - ARM Cortex-M4

31,65 EUR

incl. 19 % USt zzgl. Versandkosten

Gewicht: 0.0035 kg

Hersteller: PJRC

Lagerbestand: 34

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Art.Nr.: 20160128
     

Produktbeschreibung

The Teensy USB Development Board is a complete USB-based microcontoller development system.

Version 3.6 features a 32 bit 180 MHz ARM Cortex-M4 processor with floating point unit. All digital and analog pins are 3.3 volts. Do not apply more than 3.3V to any signal pin.

All Teensy boards are shipped assembled and fully tested.

Features:

  • 180 MHz ARM Cortex-M4 with Floating Point Unit
  • 1M Flash, 256K RAM, 4K EEPROM
  • Microcontroller Chip MK66FX1M0VMD18 (PDF link)
  • USB High Speed (480 Mbit/sec) Port
  • 2 CAN Bus Ports
  • 32 General Purpose DMA Channels
  • 22 PWM Outputs
  • 4 I2C Ports
  • 11 Touch Sensing Inputs
  • 62 I/O Pins (42 breadboard friendly)
  • 25 Analog Inputs to 2 ADCs with 13 bits resolution
  • 2 Analog Outputs (DACs) with 12 bit resolution
  • 20 PWM Outputs (Teensy 3.6 has 22 PWM)
  • USB Full Speed (12 Mbit/sec) Port
  • Ethernet mac, capable of full 100 Mbit/sec speed
  • Native (4 bit SDIO) micro SD card port
  • I2S Audio Port, 4 Channel Digital Audio Input & Output
  • 14 Hardware Timers
  • Cryptographic Acceleration Unit
  • Random Number Generator
  • CRC Computation Unit
  • 6 Serial Ports (2 with FIFO & Fast Baud Rates)
  • 3 SPI Ports (1 with FIFO)
  • 3 I2C Ports (Teensy 3.6 has a 4th I2C port)
  • Real Time Clock


Kunden kauften auch

Druckluft 67 200ml

Druckluft 67 200ml

7,45 EUR

Kabel USB A - micro USB B 5 pol. - 1,8m

Kabel USB A - micro USB B 5 pol. - 1,8m

2,00 EUR

Teensy v2.0 USB Board - ATmega32U4 AVR

Teensy v2.0 USB Board - ATmega32U4 AVR

17,61 EUR

Raspberry Pi A+/B+/Pi2/Pi3 Prototyping HAT mit EEPROM (RPi-Proto-HAT)

Raspberry Pi A+/B+/Pi2/Pi3 Prototyping HAT mit EEPROM (RPi-Proto-HAT)

6,50 EUR

NeoPixel Stick - 8 x WS2812 5050 RGB LED

NeoPixel Stick - 8 x WS2812 5050 RGB LED

6,55 EUR