Product from Atmel

ATMEGA644-20PU

AVR Microcontroller.

DIP40 Package

ATMEGA644P-20PU

picoPower technology AVR Microcontroller.

DIP40 Package

Atmel AT90USBkey2

The AT90USBKey is a low-cost demonstration board based on the AT90USB1287 microcontroller. It allows the quick evaluation of AVR microcontrollers and the AT90USB family. The key simply connects to the USB port of a personal computer to retrieve on-board documentation and run AVR programs.

Atmel ATMEGA328P-AU TQFP32

32KB self-programming Flash Program Memory, 2KB SRAM, 1024 Bytes EEPROM, 8 Channel 10-bit A/D-converter(TQFP/MLF). debugWIRE On-chip Debug System. Up to 20 MIPS throughput at 20 MHz.
Operating Voltage: 1,8V - 5.5V

Atmel ATMEGA328P-PU DIP28

32KB self-programming Flash Program Memory, 2KB SRAM, 1024 Bytes EEPROM, 8 Channel 10-bit A/D-converter(TQFP/MLF). debugWIRE On-chip Debug System. Up to 20 MIPS throughput at 20 MHz.
Operating Voltage: 1,8V - 5.5V

Atmel ATSTK1000 - AP7000 Eval Board

STK1000 provides a complete AT32AP7000 development environment. The kit has two ethernet ports, a high quality QVGA LCD, a loudspeaker, and connectors for USART, PS/2, VGA, and USB. A expansion header can be used for prototyping.

Atmel AVR Butterfly

AVR Butterfly is an evaluation tool demonstrating the capabilities of the latest AVR Technology. The tool is shipped with preloaded firmware supporting temperature sensing, light measurement, voltage readings and music playback. AVR Butterfly can also be used as a nametag.

Atmel AVR Dragon

The AVR Dragon sets a new standard for low cost development tools. AVR Dragon supports all programming modes for the AVR, Xmega and AVR32 device family.

Atmel AVR ISP mkII Programmer

AVR In-System Programmer mkII is used for field upgrades of AVR Flash microcontrollers. The AVRISP mkII combined with AVR Studio can program new AVR 8-bit RISC microcontrollers with ISP Interface.

Atmel EVK1100 AVR32 - Eval Kit

The EVK1100 is an evaluation kit and development system for the AVR32 AT32UC3A microcontroller.
It is equipped with a rich set of peripherals, memory, and makes it easy to try the full potential of the AVR32 devices.

Atmel EVK1101 AVR32 - Eval Kit

The EVK1101 is an evaluation kit and development system for the AVR32 AT32UC3B microcontroller.
It is equipped with a rich set of peripherals, memory, and makes it easy to try the full potential of the AVR32 devices

Atmel EVK1105 AVR32 - Evalkit

The AVR32 EVK1105 is an evaluation kit for the AT32UC3A0512 which demonstrates Atmel’s state-of-the-art AVR32 microcontroller in Hi-Fi audio decoding and streaming applications.

Atmel JTAG ICE 3 - ATJTAGICE3

Mid-range in-circuit debugger and programmer for Atmel 8-bit and 32-bit AVR microcontrollers with on-chip debugging for source level symbolic debugging, NanoTrace (if supported by the device) and device programming.

Atmel JTAG ICE MK2

The AVR JTAGICE mkII from Atmel® is a powerful development tool for On-chip Debugging of all AVR 8-bit RISC MCUs and AVR32 32-bit DSP/MCUs with IEEE 1149.1 compliant JTAG interface.

Atmel MEGA-1284P Xplained (ATMEGA1284P-XPLD)

The AVR Xplained kits are great platforms for early evaluation of the capabilities offered by the AVR microcontrollers.
The MEGA-1284P Xplained contain one QTouch button sensor, three mechanical buttons, four LEDs, 3 analog sensors, a UART to USB bridge.
The AVR Xplained expansion headers provide easy access to analog and digital I/O pins. The board is powered by the USB cable and equipped with the standard 10-pin JTAG header that connects to the full range of AVR debuggers.

Atmel NGW100 AVR32 Eval Kit

The NGW100 uses the AT32AP7000 which combines Atmel's state of the art AVR32 Digital Signal Processor CPU with an unrivalled selection of communication interfaces.

Atmel RZ Raven

The RZ RAVEN 2.4 GHz Evaluation and Starter kit enables development, debugging and demonstration of a wide range of lowpower wireless applications including IEEE 802.15.4, 6LoWPAN and ZigBee networks.

Atmel Sensors Xplained Inertial One (ATAVRSBIN1)

ATAVRSBIN1 Sensors Xplained Inertial One System Board is a part of Atmel's Xplained series of evaluation and development tools that provides a compatible series of Processor Boards, System Boards and Software Environment enabling easy selection and development across a wide range of 8 to 32 bit AVR processor products.

Atmel Sensors Xplained Inertial Two (ATAVRSBIN2)

ATAVRSBIN2 Sensors Xplained Inertial Two System Board is a part of Atmel Xplained series of evaluation and development tools that provides a compatible series of Processor Boards, System Boards and Software Environment enabling easy selection and development across a wide range of 8 to 32 bit AVR processor products.

Atmel Sensors Xplained Pressure One (ATAVRSBPR1)

ATAVRSBPR1 Sensors Xplained - Pressure One System Board is a part of Atmel's Xplained series of evaluation and development tools that provides a compatible series of Processor Boards, System Boards and Software Environment enabling easy selection and development across a wide range of 8 to 32 bit AVR processor products.

Atmel STK600

Atmel STK600 - AVR/AVR32 Evalkit
The Atmel AVR STK600 is a complete starter kit and development system for the AVR and AVR32 flash microcontrollers from ATMEL Corporation.

Atmel UC3-A3 Xplained (AT32UC3A3-XPLD)

The UC3-A3 Xplained features the AT32UC3A3256 device which is optimized for high speed communication and protocol conversion. The AVR device offers a Hi-Speed USB device and mini host, 256KB Flash, 128KB of high speed SRAM, external SDRAM and NAND Flash ports, dual SD card ports and a rich selection of communication ports. The UC3A3 Xplained kit features a Hi-Speed USB Port, one 64Mbit SDRAM, four LEDs, QTouch slider and button, NTC temperature sensor, analog filter, and 4 I/O expansion ports.

Atmel UC3-L0 Xplained (AT32UC3L0-XPLD)

The UC3-L0 Xplained features the AT32UC3L064, which is a picoPower device optimized for low power control applications. The AVR device offers ultra low power consumption, 64 KB of Flash and 16 KB of SRAM, and a rich selection of communication ports. The UC3L0 Xplained kit features four LEDs + one RGB LED, QTouch slider and button, NTC temperature sensor and analog filter, and 4 I/O expansion ports. Because the UC3L064 does not offer a USB port, the kit also features an external USB to UART/I2C bridge (AT32UC3B1256).

Atmel XMEGA-A1 Xplained (AVR-XPLAIN)

Xplain is an easy to use evaluation and demonstration kit for ATxmega128A1, offering a complete hardware for evaluating the highly accurate analog functionality of the device. The ADC can be used to read a temperature sensor and a potentiometer, and the DAC can be used to generate sound on a mono speaker.

ATSTK500

Atmel STK500 - AVR Evalkit
The Atmel AVR STK500 is a starter kit and development system for Atmel's AVR Flash microcontrollers

ATSTK600-RC14

Atmel STK600-RC064X-14 (ATSTK600-RC14)
SKU: ATSTK600-RC14
Routingcard for 64-pin XMEGA™ in TQFP socket

ATSTK600-RC15

Atmel STK600-RC044X-15 (ATSTK600-RC15)
SKU: ATSTK600-RC15
Routingcard for 44-pin XMEGA™ in TQFP socket

ATSTK600-RC23

Atmel STK600-RC020T-23 (ATSTK600-RC23)
SKU: ATSTK600-RC23
Routingcard for 20-pin tinyAVR® in SOIC socket

ATSTK600-RC26

Atmel STK600-RCPWM-26 (ATSTK600-RC26)
SKU: ATSTK600-RC26
Routingcard for 20-pin AVR® PWM series in SOIC socket

ATSTK600-RC28

Atmel STK600-RCuC3A100-28 (ATSTK600-RC28)
SKU: ATSTK600-RC28
Routingcard for 100-pin AVR® UC3™ A1 series in TQFP socket

ATSTK600-RC29

Atmel STK600-RC032M-29 (ATSTK600-RC29)
SKU: ATSTK600-RC29
Routingcard for 32-pin megaAVR® in TQFP socket

ATSTK600-RC30

Atmel STK600-RC044M-30 (ATSTK600-RC30)
SKU: ATSTK600-RC30
Routingcard for 44-pin megaAVR® in TQFP socket

ATSTK600-RC31

Atmel STK600-RC044M-31 (ATSTK600-RC31)
SKU: ATSTK600-RC31
Routingcard for 44-pin megaAVR® in TQFP socket

ATSTK600-RC34

Atmel STK600-RCUC3L0-34 (ATSTK600-RC34)
SKU: ATSTK600-RC34
Routingcard for 48-pin AVR® UC3™ L0 series in TQFP socket

ATSTK600-RC36

Atmel STK600-RCUC3C0-36 (ATSTK600-RC36)
SKU: ATSTK600-RC36
Routingcard for 144-pin AVR® UC3™ C0 series in TQFP socket

ATSTK600-RC38

Atmel STK600-RCUC3C1-38 (ATSTK600-RC38)
SKU: ATSTK600-RC38
Routingcard for 100-pin AVR® UC3™ C1 series in TQFP

ATSTK600-RC40

Atmel STK600-RCUC3C2-40 (ATSTK600-RC40)
SKU: ATSTK600-RC40
Routingcard for 64-pin AVR® UC3™ C2 series in TQFP socket

ATSTK600-SOIC

The STK600-SOIC package contains a socket board and adapter boards for SOIC devices, and is an expansion module for STK600.

ATSTK600-TINY10

Adapter for Atmels ATtiny4/5/9/10

ATSTK600-TINYX3U

Adapter for Atmels Tinyx3U

ATSTK600-TQFP100

The STK600-TQFP100 package contains a socket board and adapter boards for 100-pins TQFP 0.5 mm pitch devices, and is an expansion module for STK600.

ATSTK600-TQFP32

The STK600-TQFP32 package contains socket board and adapter boards for 32-pins TQFP 0.8 mm pitch devices, and is an expansion module for STK600.

ATSTK600-TQFP44

The STK600-TQFP44 package contains socket board and adapter boards for 44-pins TQFP 0.8 mm pitch devices, and is an expansion module for STK600.

ATSTK600-TQFP64

The STK600-TQFP64 package contains a socket board and adapter boards for 64-pins TQFP 0.8 mm pitch devices, and is an expansion module for STK600.

ATSTK600-TQFP64-2

The STK600-TQFP64-2 package contains a socket board and a adapter board for the AT32UC3B 64-pins TQFP 0.5 mm pitch devices, and is an expansion module for STK600.

ATSTK600-UC3-144

The STK600-UC3-144 is a socket board and expansion module for STK600, supporting the AT32UC3A 144-pins TQFP devices.

Ordering Code: ATSTK600-UC3A0X-144

Kinetis KwikStik K40

The KwikStik development tool is an ultra low-cost, all-in-one development tool for evaluating, developing and debugging Kinetis MCUs. It features the K40X256VLQ100 (144LQFP) MCU with USB, Touch Sensing and Segment LCD functionality. The KwikStik development tool can be used standalone or integrated with the Freescale Tower System. The on-board Segger™ J-Link™ debug interface allows the user to evaluate the features of the on-board Kinetis K40 MCU or to develop, debug and program their own target hardware based on any Kinetis MCU.

STM32L-Discovery

The STM32L-DISCOVERY helps you to discover the STM32L ultralow power features and to develop and share your applications.

It is based on an STM32L152RBT6 and includes an ST-Link/V2 embedded debugging tool interface, an LCD (24 segments, 4 commons), LEDs, pushbuttons, a linear touch sensor or touchkeys.