BeagleBoard

Beacon Board

The Beacon Board is a small LED display accessory board designed for the BeagleBoard or PandaBoard.

18,31 EUR incl. 19 % VAT excl. shipping costs

Lagernd, gewöhnlich versandfertig in 24 Stunden.

The BeagleBoard is an incredibly powerful single-board computer, featuring the TI OMAP3530 system on a chip. The board is supported by a large community and is designed with open-source development in mind.

124,95 EUR incl. 19 % VAT excl. shipping costs

Lagernd, gewöhnlich versandfertig in 24 Stunden.

BeagleBoard-xM (Rev. C)

BeagleBoard-xM delivers extra ARM ^® Cortex ^TM -A8 MHz now at 1 GHz and extra memory with 512MB of low-power DDR RAM, enabling hobbyists, innovators and engineers to go beyond their current imagination and be inspired by the BeagleBoard.org community. Designed with the community inputs in mind, this open hardware design improves upon the laptop-like performance and expandability, while keeping at hand-held power levels. Direct connectivity is supported by the on-board four-port hub with 10/100 Ethernet, while maintaining a tiny 3.25" × 3.25" footprint.

148,75 EUR incl. 19 % VAT excl. shipping costs

Nicht lagernd, Ware bereits nachbestellt.

BeagleBone

The Beagle Bone is the low-cost, high-expansion hardware-hacker focused BeagleBoard. It is a bare-bones BeagleBoard that acts as a USB or Ethernet connected expansion companion for your current BeagleBoard and BeagleBoard-xM or works stand-alone. The BeagleBone is small even by BeagleBoard standards and with the high-performance ARM capabilities you expect from a BeagleBoard, the BeagleBone brings full-featured Linux to places it has never gone before.

80,92 EUR incl. 19 % VAT excl. shipping costs

Lagernd, gewöhnlich versandfertig in 24 Stunden.

Dog House for the BeagleBoard

The Dog House, designed and built by ESawdust in Colorado, is a robust enclosure designed specifically for the BeagleBoard. It provides four built-in standoffs which let you snap the Beagle Board securely to a firm foundation, eliminating any need for standoffs, PCB screws, drilling. The built-in feet let you mount the Dog House to any solid surface using 4 screws or bolts (not included). Works with all known versions of the BeagleBoard (C2, C3, and C4).

PRT-09720

37,14 EUR incl. 19 % VAT excl. shipping costs

Lagernd, gewöhnlich versandfertig in 24 Stunden.

Dog House for the BeagleBoard-xM

The Dog House for BeagleBoard xM is a sturdy, lightweight, powder-coated aluminum case for the Beagle Board xM. The Dog House by itself weighs just 4.5 ounces (127 grams) - with the Beagle Board xM mounted, the package weighs less than 7 ounces. A three piece design including a lid, wrapper, and baseplate makes assembling a breeze, not to mention the built-in standoffs with 4-40 fasteners to secure your board to the baseplate.

PRT-10034

37,14 EUR incl. 19 % VAT excl. shipping costs

Lagernd, gewöhnlich versandfertig in 24 Stunden.

Flyswatter

The Flyswatter is a compact USB to JTAG in-circuit debugger and programmer designed for ARM cores. It can be used with all ARM processors that are supported by OpenOCD. It connects via USB to the host PC. The Flyswatter provides a standard 14-pin JTAG interface as well as a standard RS232 port with support for full modem signals.

47,60 EUR incl. 19 % VAT excl. shipping costs

Lagernd, gewöhnlich versandfertig in 24 Stunden.

Flyswatter - BeagleBoard Adapter Kit

This kit provides adapter boards that enable the Flyswatter to interface with the BeagleBoard's JTAG and RS-232 headers.

17,26 EUR incl. 19 % VAT excl. shipping costs

Geringer Lagerbestand.

HDMI to DVI-D cable 3,0m

1 x HDMI 19 Pin Connector - 1 x DVI-D 18+1 Pin Connector

5,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, gewöhnlich versandfertig in 24 Stunden.

LVDS Adapter V2

Fully assembled and tested v2 PCB board for LCD panels with 18-bits or 24-bits LSB LVDS interface.

33,56 EUR incl. 19 % VAT excl. shipping costs

Lagernd, gewöhnlich versandfertig in 24 Stunden.

LVDS Adapter V2 + 10" LCD with Touchscreen

10" display with integrated 2 points capacitive touchscreen with USB interface

Tested to work with:
- BeagleBoard
- BeagleBoard-xM
- PandaBoard

132,09 EUR incl. 19 % VAT excl. shipping costs

Lagernd, gewöhnlich versandfertig in 24 Stunden.

Power Supply 5V / 1.6A

Switching power supply HNP12-050

Voltage: 5V
Current: 1,6A
1,2m cable with 2,1mm Connector

6,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, gewöhnlich versandfertig in 24 Stunden.

Trainer for BeagleBoard

The Trainer Board is an expansion/breakout board for the BeagleBoard that adds:
I2C, SPI, GPIO, Standard prototyping area, ATmega328

50,95 EUR incl. 19 % VAT excl. shipping costs

Lagernd, gewöhnlich versandfertig in 24 Stunden.

Trainer for BeagleBoard-xM

The Trainer-xM Board is an expansion/breakout board for the BeagleBoard-xM that adds:
I2C, SPI, GPIO, Standard prototyping area, ATmega328

50,95 EUR incl. 19 % VAT excl. shipping costs

Nicht lagernd, Ware bereits nachbestellt.

Zippy Ethernet Combo Board (BeagleBuddy)

The Zippy is a expansion board for the BeagleBoard that provides: Ethernet, SD/MMC, battery backed-up RTC, RS-232 serial port, and a 5V I2C interface for the BeagleBoard.

DEV-09731

68,27 EUR incl. 19 % VAT excl. shipping costs

Lagernd, gewöhnlich versandfertig in 24 Stunden.

Zippy2 Ethernet Combo Board (KSZ8851SNL-BBE-EVAL)

The Zippy2 (KSZ8851SNL-BBE-EVAL) 10/100 Ethernet Combo Board is an expansion board for the BeagleBoard that adds an Ethernet interface, a second SD/MMC memory card interface, a battery backed-up Real Time Clock, a second RS-232 serial port, and a I²C expansion interface (5V).

92,82 EUR incl. 19 % VAT excl. shipping costs

Lagernd, gewöhnlich versandfertig in 24 Stunden.