Arduino


More categories

Adafruit DC Boarduino Kit (Arduino compatible)

Adafruit DC Boarduino Kit (Arduino compatible)

This is a Arduino clone from LadyAda with ATmega328.
It is specialy made for use it on a solderless breadboard.

17,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Adafruit GEMMA - Miniature wearable electronic platform

Adafruit GEMMA - Miniature wearable electronic platform

Love FLORA but want a bite-sized version? Look no further, GEMMA is a tiny wearable platform board with a lot of might in a 1" diameter package. Powered by a Attiny85 and programmable with an Arduino IDE over USB, you'll be able to realize any wearable project!

7,28 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Adafruit Trinket - Mini Microcontroller - 3.3V Logic

Adafruit Trinket - Mini Microcontroller - 3.3V Logic

Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation.

7,39 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Adafruit Trinket - Mini Microcontroller - 5V Logic

Adafruit Trinket - Mini Microcontroller - 5V Logic

Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power.

7,39 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Adafruit USB Boarduino Kit V2.0 (Arduino compatible)

Adafruit USB Boarduino Kit V2.0 (Arduino compatible)

This clone acts just like an Arduino, and works with the latest Arduino software. For many projects it can even be preferable! The kit includes all parts necessary, the assembly is straightforward and well documented, using just a soldering iron anyone can complete it within 10 or 15 minutes.

23,00 EUR incl. 19 % VAT excl. shipping costs

Geringer Lagerbestand.

Arduino Due

Arduino Due

The Arduino Due is the newcomer microcontroller board in the Arduino boards family. It's the first board based on a 32 bit ARM core processor, the Atmel SAM3X8E ARM Cortex-M3 MCU, that improve all the standard Arduino functionalities and add more new features.

46,41 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Arduino Esplora

Arduino Esplora

The Arduino Esplora is a microcontroller board derived from the Arduino Leonardo. The Esplora differs from all preceding Arduino boards in that it provides a number of built-in, ready-to-use setof onboard sensors for interaction. It's designed for people who want to get up and running with Arduino without having to learn about the electronics first. For a step-by-step introduction to the Esplora, check out the Getting Started with Esplora guide.

49,86 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Arduino Ethernet WITH PoE

Arduino Ethernet WITH PoE

The Arduino Ethernet is a microcontroller board based on the Arduino Uno, and incorporating a WizNet W5100 TCP/IP Embedded Ethernet Controller. It can be programmed like an Uno via a six-pin FTDI -style serial connector. The Arduino USB 2 Serial adapter or any FTDI-style USB-to-serial connector can be used to program it.

A power-over-Ethernet (PoE) module is soldered to the board to provide power from a conventional twisted pair Category 5 Ethernet cable. It is IEEE802.3af compliant, and works with all compliant PoE injectors currently available.

65,33 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Arduino Ethernet without PoE module

Arduino Ethernet without PoE module

The Arduino Ethernet is a microcontroller board based on the Arduino Uno, and incorporating a WizNet W5100 TCP/IP Embedded Ethernet Controller. It can be programmed like an Uno via a six-pin FTDI -style serial connector. The Arduino USB 2 Serial adapter or any FTDI-style USB-to-serial connector can be used to program it.


47,48 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Arduino FIO (Arduino compatible)

Arduino FIO (Arduino compatible)

The Arduino Funnel I/O (Fio) is a board designed by Shigeru Kobayashi, based on the original design from LilyPad.

DEV-10116

21,57 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Arduino ISP

Arduino ISP

With this programmer you can upload sketches and burn the bootloader on any Arduino (or other brand) AVR based boards through the ICSP connector. By uploading a sketch with an external programmer you can remove the bootloader and use the extra space for your sketch.

14,28 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Arduino Leonardo

Arduino Leonardo

The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

19,04 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Arduino Leonardo (with headers)

Arduino Leonardo (with headers)

The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

21,42 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Arduino Mega 2560 R3

Arduino Mega 2560 R3

The Arduino Mega 2560 has 53 IO (including 4 HW UARTs, 14 PWMs, I2C bus) and 16 Analog Input pins.
It can mount and use most of the Arduino Shields.

48,79 EUR - 46,41 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Arduino Mega ADK R3

Arduino Mega ADK R3

The Arduino ADK is a microcontroller board based on the ATmega2560. It has a USB host interface to connect with Android based phones.

55,93 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Arduino Micro - 5V 16MHz - (ATmega32u4)

Arduino Micro - 5V 16MHz - (ATmega32u4)

The Arduino Micro is a microcontroller board based on the ATmega32u4 (datasheet), developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.

21,42 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Arduino Mini

Arduino Mini

Mini - This is the smallest Arduino board. It works well in a breadboard or for applications in which space is at a premium. It connects to the computer using the Mini USB Adapter.

22,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Arduino Nano V3.0

Arduino Nano V3.0

Arduino Nano is a surface mount breadboard embedded version with integrated USB. It is a smallest, complete, and breadboard friendly. The Nano was designed and is being produced by Gravitech.

40,00 EUR - 37,50 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Arduino On Android Kit

Arduino On Android Kit

Here we are with The Arduino On Android Kit!

Use your Arduino MEGA ADK (usb cable included) to connect an Android device. Mount all your experiments on the breadbourd and join your components using your wire kit. Build visual indicators using some of the 40 LEDs in the kit; you have them in 4 different colors.

225,98 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Arduino Pro 328 - 3.3V/8MHz

Arduino Pro 328 - 3.3V/8MHz

It's blue! It's skinny! It's the Arduino Pro! SparkFun's minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader.

DEV-10914

only 8,93 EUR instead 13,61 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Arduino Pro 328 - 5V/16MHz

Arduino Pro 328 - 5V/16MHz

It's blue! It's skinny! It's the Arduino Pro! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader in a super-sleek form factor that will fit easily into your next small project.

DEV-10915

13,61 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Arduino Pro Mini 328 - 3.3V/8MHz

Arduino Pro Mini 328 - 3.3V/8MHz

Replacement: Wattuino pro mini

It's blue! It's thin! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader.

DEV-11114

9,50 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Arduino Pro Mini 328 - 5V/16MHz

Arduino Pro Mini 328 - 5V/16MHz

Replacement: Wattuino pro mini

It's blue! It's thin! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader.

DEV-11113

9,50 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Arduino Robot

Arduino Robot

The Arduino Robot is the first official Arduino on wheels. The robot has two processors, one on each of its two boards. The Motor Board controls the motors, and the Control Board reads sensors and decides how to operate. Each of the boards is a full Arduino board programmable using the Arduino IDE.

224,91 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Arduino Uno R3

Arduino Uno R3

The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

23,80 EUR - 22,02 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Arduino Uno SMD

Arduino Uno SMD

The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

25,80 EUR - 23,80 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Arduino YUN

Arduino YUN

Arduino YÚN is the first member of a new groundbreaking line of wifi products combining the power Linux with ease of use of Arduino. The first Arduino YÚN is the combination of a classic Arduino Leonardo (based on the Atmega32U4 processor) with a Wifi system-on-a-chip running Linino (a MIPS GNU/Linux based on OpenWRT).

63,07 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

ArduPilot (Arduino compatible UAV-Controller)

ArduPilot (Arduino compatible UAV-Controller)

This is a Arduino-compatible autopilot board designed by Chris Anderson and Jordi Muñoz of DIY Drones using the new ATMega328. This board was used to win the annual autonomous vehicle competition put on by SparkFun.

GPS-08785

22,72 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



ArduPilot Mega - Arduino compatible UAV Controller

ArduPilot Mega - Arduino compatible UAV Controller

The ArduPilot Mega is the newest version of autopilot board designed by Chris Anderson and Jordi Muñoz of DIY Drones. This latest revision uses the ATmega2560 in place of the ATmega1280.

GPS-10294

38,08 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

ArduPilot Mega - Arduino compatible UAV-Controller

ArduPilot Mega - Arduino compatible UAV-Controller

The ArduPilot Mega is the newest version of autopilot board designed by Chris Anderson and Jordi Muñoz of DIY Drones using the ATmega1280.

GPS-09710

only 35,70 EUR instead 47,60 EUR incl. 19 % VAT excl. shipping costs

Geringer Lagerbestand.

AVR-T32U4

AVR-T32U4

ARDUINO Leonardo like board with ATMEGA32U4.

15,41 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Freeduino Serial v2.0 Kit

Freeduino Serial v2.0 Kit

This kit, once assembled, can be used with Arduino IDE and it is Arduino Diecimila compatible. 

15,59 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Freeduino USB Kit (NKC)

Freeduino USB Kit (NKC)

The Computer Science Division at Allegheny College created some very cool Freeduino USB Kit assembling videos!!!

The KIT now includes the ATmega328P microcontroller and requires Arduino IDE version 0013 or higher. Select "Arduino Duemilanove w/ATmega328" in the boards menu.

21,95 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Hackvision - Kit

Hackvision - Kit

Hackvision is the tiny, hackable, Arduino-based video game system. 

33,95 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Intel Galileo

Intel Galileo

The Intel Galileo is a microcontroller board based on the Intel Quark SoC X1000 Application Processor, a 32-bit Intel Pentium-class system on a chip. It’s the first board based on Intel® architecture designed to be hardware and software pin-compatible with Arduino shields designed for the Uno R3. Digital pins 0 to 13 (and the adjacent AREF and GND pins), Analog inputs 0 to 5, the power header, ICSP header, and the UART port pins (0 and 1), are all in the same locations as on the Arduino Uno R3.

only 58,91 EUR instead 65,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

LCD-BackPack  (Arduino compatible)

LCD-BackPack (Arduino compatible)

Backpack to control HD44780 compatible displays over UART or I2C.



13,49 EUR - 11,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Makey Makey

Makey Makey

MaKey MaKey is an invention kit for the 21st century. Turn everyday objects into touchpads and combine them with the internet. It's a simple Invention Kit for Beginners and Experts doing art and engineering.

46,41 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Minuino - Kit

Minuino - Kit

The Minuino is an Arduino clone. Our objective with the Minuino was to make a minimal part, cost, and sized Arduino clone. The Minuino works with standard Arduino shields.

14,28 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Olimexino-328

Olimexino-328

ARDUINO like board with ATMEGA328.

26,12 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Olimexino-32U4 (Arduino Leonardo compatible)

Olimexino-32U4 (Arduino Leonardo compatible)

ARDUINO Leonardo like board with ATMEGA32U4.

15,41 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Pro Micro - 5V/16MHz

Pro Micro - 5V/16MHz

Here at SparkFun, we refuse to leave ‘good enough’ alone. That’s why we’re adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.

DEV-12640

17,60 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Rainbowduino 328 RGB LED Driver (Arduino compatible) V3.0

Rainbowduino 328 RGB LED Driver (Arduino compatible) V3.0

Rainbowduino is an Arduino compatible controller board with professional LED driving capacity.

22,49 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Rainbowduino RGB LED Driver (Arduino compatible)

Rainbowduino RGB LED Driver (Arduino compatible)

17,49 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



RedBearLab Blend - BLE meets Arduino Leonardo

RedBearLab Blend - BLE meets Arduino Leonardo

Blend is an integrated developement board, we have "blend"ed Arduino with Bluetooth 4.0 Low Energy (aka BLE or Bluetooth Smart) into a single board. It is targeted for makers to develop low power Internet-Of-Things (IoT) projects quickly and easily.

36,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

RedBearLab Blend Micro - BLE meets Arduino Micro

RedBearLab Blend Micro - BLE meets Arduino Micro

Blend Micro is our first integrated developement board, we have "blend"ed Arduino with Bluetooth 4.0 Low Energy (aka BLE or Bluetooth Smart) into a single board. It is targeted for makers to develop low power Internet-Of-Things (IoT) projects quickly and easily.

32,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

RedBearLab nRF51822 - ARM + BLE Dev kit

RedBearLab nRF51822 - ARM + BLE Dev kit

RedbearLab nRF51822 is an integrated "ARM + BLE4.0" development board. We have integrated Nordic nRF51822 with Freescale MK20 into a single mbed and Arduino compatible board. It is targeted for makers, engineers and students to develop low power Internet-Of-Things (IoT) projects/prototypes quickly and easily.

37,39 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Seeeduino Film

Seeeduino Film

Seeeduino FILM is an Arduino compatible development platform for space-sensitive projects. It’s flexible, super slim, with built-in Li-Po charger, suitable to build wearable applications. FILM and other extension FRAMEs could be simply connected via the 20p universal bus like a chain, native 2.54mm pitch pins also enables quick prototyping.

25,59 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Seeeduino Mega V3.0 (Arduino compatible)

Seeeduino Mega V3.0 (Arduino compatible)

In the pursuit for small form factor, flexibility and functionality comes Seeeduino Mega – derived from Arduino Mega it harnesses the power of ATmega2560 to spice up your project building experience.

35,70 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Seeeduino Stalker v2.3

Seeeduino Stalker v2.3

Seeeduino Stalker is a feature rich Arduino compatible Wireless Sensor Network node. Its modular structure and onboard peripherals makes it convenient to log and time stamp sensor data on a periodic basis. The Seeeduino Stalker is a good candidate for all your tracking, monitoring and control projects.

33,15 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Seeeduino V3 (Atmega 328P)

Seeeduino V3 (Atmega 328P)

Seeeduino is Arduino compatible board. Based on Duemilanove Schematic, 100% compatible to its existing program, shield and IDEs. On the hardware part, remarkable changes are taken to improve the flexibility and user experience.

20,49 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager