Analyzer / DSO

Bus Pirate (SparkFun Edition)

Bus Pirate (SparkFun Edition)

The Bus Pirate, created by Ian Lesnet and featured on Hack a Day, is a troubleshooting tool that communicates between a PC and any embedded device over most standard serial protocols, which include I2C, SPI, and asynchronous serial - all at voltages from 0-5.5VDC. This product eliminates a ton of early prototyping effort when working with new or unknown chips.

TOL-09544

24,99 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager



Bus Pirate Cable

Bus Pirate Cable

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable's connector is composed of two rows of five 0.1" spaced pins; it's also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The leads of the cable are terminated with female ends to mate with test hooks (coming soon!).

CAB-09556

3,95 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Bus Pirate LCD Adapter v3

Bus Pirate LCD Adapter v3

Control HD44780 LCDs from the Bus Pirate with this breakout board. The Bus Pirate LCD mode uses an adapter because there aren't enough pins to control a character display. You can build it with a few chips on a bread board, or you can buy this one ready-made. Includes a short connector cable. Every sale directly supports open source development of the Bus Pirate.

8,20 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Bus Pirate probe kit

Bus Pirate probe kit

This is a interface cable designed for Bus Pirate which can makes it easier to connect the Bus Pirate to a circuit and get hacking.


3,95 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Bus Pirate v3.6

Bus Pirate v3.6

Bus Pirate v3 is a universal bus interface that talks to electronics from a PC serial terminal. Get to know a chip without writing code. Eliminates a ton of early prototyping effort with new or unknown chips.

25,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Bus Pirate v4

Bus Pirate v4

Bus Pirate v4 is a universal bus interface that talks to electronics from a computer serial terminal. Get to know a chip without writing code. Eliminates a ton of early prototyping effort with new or unknown chips.

34,54 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Capacitance Meter Kit

Capacitance Meter Kit

Features:

  • About 1% accuracy
  • Measure range: 1pF - 500uF
  • Automatic range switch
  • Zeroing available
  • Real time serial output of measurement read-outs with time stamp
  • Low cost and easy to build
  • 8,00 EUR incl. 19 % VAT excl. shipping costs

    Nicht auf Lager



    Digital Oscilloscope & Frequency Meter DSO 068

    Digital Oscilloscope & Frequency Meter DSO 068

    DSO 068 DIY kit uses through-hole components as much as it can. This makes the scope unique among peers. With through-hole components the kit eases off the requirement of assembly skills and at the same time allows deeper user involvement. Most importantly it brings in the freedom for users to test, modify, experiment, and even design their own projects. And this means more fun!

    72,00 EUR incl. 19 % VAT excl. shipping costs

    Lagernd, versandfertig in 24 Stunden.

    Digital Storage Oscilloscope (DSO 09601)

    Digital Storage Oscilloscope (DSO 09601)

    DSO096 has similar structure as DSO062 but its performance has been significantly improved. Comparing to 062 DSO 096 bandwidth is 5 times wider (5M vs 1M) and sensitivity is 10 times higher (10mV vs 0.1V). Particularly, its frequency meter has been greatly enhanced. It can measure frequency higher than 20MHz at sensitivity better than 0.2Vpp (062 can only take 5 - 6 MHz signal and requires TTL level). Another big improvement is that DSO096 is battery-powered. Accepted voltage ranges from 2V to 5V so one regular 3.7V Li-ion or two 1.2V Ni-HM batteries can be used. It also comes with a built-in charger specific for 3.7V li-ion battery.

    68,95 EUR incl. 19 % VAT excl. shipping costs

    Nicht auf Lager



    Digital Storage Oscilloscope Kit (DSO 062)

    Digital Storage Oscilloscope Kit (DSO 062)

    This is small DIY DSO Kit from JYE Tech  PN: 06204KP ( with all SMD Parts mounted)

    People talked about an oscilloscope for DIYers, that’s how we know about JYE tech. Mr. Liu is an admirable experienced engineer, being the first generation of university EE student after culture revolution. His seriousness on documents and every detail amazed me. You will find complete document on their website, including demos and assemle guide. We are honored to carry their products, neat and handy for Arduino level electrical development.

    41,95 EUR incl. 19 % VAT excl. shipping costs

    Lagernd, versandfertig in 24 Stunden.

    DSO BNC Probe

    DSO BNC Probe

    BNC Probe Kit for the JYETech DSO´s.

    9,75 EUR incl. 19 % VAT excl. shipping costs

    Lagernd, versandfertig in 24 Stunden.

    FG085 Function Generator DIY Kit

    FG085 Function Generator DIY Kit

    The FG085 is a low cost yet versatile function generator capable of producing signals of many different waveforms. As an easy-to-use tool operation of FG085 is very simple and straightforward. It is an ideal test/experiment tool for electronic hobbyists and students.

    41,50 EUR incl. 19 % VAT excl. shipping costs

    Nicht auf Lager



    Frequency Counter Kit (1Hz-6MHz)

    Frequency Counter Kit (1Hz-6MHz)

    This new revision includes a JST cable and also fixes the TX/RX swap from the last revision. Now you can use an FTDI correctly. We are also including a 16-pin header instead of a 40-pin header (only 16 pins are necessary).

    KIT-10140

    26,38 EUR incl. 19 % VAT excl. shipping costs

    Lagernd, versandfertig in 24 Stunden.

    IC Hook with Pigtail

    IC Hook with Pigtail

    These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of grabbing very small points (like SOIC IC legs). Comes in a bag of five IC hooks of different colors (black, red, white, blue, and green). We use them with the Bus Pirate logic analyzer harnesses but are very cool on their own.

    CAB-09741

    4,36 EUR incl. 19 % VAT excl. shipping costs

    Lagernd, versandfertig in 24 Stunden.

    LabTool

    LabTool

    LabTool is a versatile and powerful addition to your lab bench!
    It is an add-on board to LPC-Link 2 (which is based on the LPC4370 - a 204 MHz Cortex-M4 with an 80 MHz ADC and two extra Cortex-M0 cores). LabTool make use of all features on the LPC4370, creating a powerful development tool.

    117,81 EUR incl. 19 % VAT excl. shipping costs

    Nicht auf Lager



    Logic Pirate

    Logic Pirate

    The Logic Pirate is an inexpensive, yet capable open source logic analyzer. It can sample 8 channels at 20 million samples per second, and may be overclocked for even faster acquisitions. It's designed to support the open source SUMP logic analyzer protocol with software available for most operating systems.

    27,89 EUR incl. 19 % VAT excl. shipping costs

    Lagernd, versandfertig in 24 Stunden.

    Logic Shrimp v1 logic analyzer

    Logic Shrimp v1 logic analyzer

    The Logic Shrimp is a medium speed, low-cost logic analyzer with a USB interface. It can capture up to 256K samples at 20MHz. Compatible with the open source SUMP logic analyzer client.

    31,95 EUR incl. 19 % VAT excl. shipping costs

    Lagernd, versandfertig in 24 Stunden.

    Multimeter Kit

    Multimeter Kit

    The Multimeter Kit provides you with everything you need to make your own multimeter capable of measure voltage (0-50VDC, 0.05 resolution) current (0-500mA, 1mA resolution) and resistance (0-100kΩ). The resistance mode also includes a continuity test: the buzzer will sound when the resistance probes are shorted together, this is one of the more handy tools of any multimeter.

    KIT-10956

    22,28 EUR incl. 19 % VAT excl. shipping costs

    Lagernd, versandfertig in 24 Stunden.

    Open Logic Sniffer

    Open Logic Sniffer

    The Open Workbench Logic Sniffer is an open source logic analyzer with a USB interface. The hardware is designed for the SUMP open source logic analyzer client and toolchain.

    45,22 EUR incl. 19 % VAT excl. shipping costs

    Lagernd, versandfertig in 24 Stunden.

    Open Logic Sniffer - Probe Cable Kit

    Open Logic Sniffer - Probe Cable Kit

    This is the probe cable for Open workbench Logic sniffer. It has a 1×9 connector and 9 leads with tweezer-style test clips. Each cable connects 8 of the 16 buffered input channels, plus groun

    5,39 EUR incl. 19 % VAT excl. shipping costs

    Lagernd, versandfertig in 24 Stunden.

    Open Logic Sniffer 16-bit Input Buffer Wing

    Open Logic Sniffer 16-bit Input Buffer Wing

    This is a A 16-bit, 5V tolerant input-only buffer for the Open Logic Sniffer logic analyzer.

    14,28 EUR incl. 19 % VAT excl. shipping costs

    Lagernd, versandfertig in 24 Stunden.

    Scanalogic-2 EDU-KIT Logic Analyzer & Signal Generator

    Scanalogic-2 EDU-KIT Logic Analyzer & Signal Generator

    SCANALOGIC-2 EDU KIT (Educational kit) is a fun and educational kit allowing you to build a high performance logic analyzer at home! It’s an even lower cost equivalent to the SCANALOGIC-2 Logic Analyzer whose performances have been proved over the last 3 years.

    39,27 EUR incl. 19 % VAT excl. shipping costs

    Lagernd, versandfertig in 24 Stunden.

    Scanalogic-2 PRO Logic Analyzer & Signal Generator

    Scanalogic-2 PRO Logic Analyzer & Signal Generator

    Scanalogic-2 PRO is a 4 channel Logic Analyzer and Digital signal generator, specially designed to decode and analyze serial protocols like SPI, I2C, UART, 1-WIRE and CAN. Scanalogic-2 is designed to be used with the ScanaStudio software, giving your logic analyzer ever evolving capabilities.

    58,31 EUR incl. 19 % VAT excl. shipping costs

    Lagernd, versandfertig in 24 Stunden.

    ScanaPLUS 100MHz Logic Analyzer

    ScanaPLUS 100MHz Logic Analyzer

    ScanaPLUS is a robust, versatile and multi-application 9 Channels logic analyzer. It relies on the free ScanaStudio software to capture and analyze logic signals.

    177,31 EUR incl. 19 % VAT excl. shipping costs

    Lagernd, versandfertig in 24 Stunden.