Analyzer / DSO

Bus Pirate (SparkFun Edition)

The Bus Pirate, created by Ian Lesnet and featured on Hack a Day, is a troubleshooting tool that communicates between a PC and any embedded device over most standard serial protocols, which include I2C, SPI, and asynchronous serial - all at voltages from 0-5.5VDC. This product eliminates a ton of early prototyping effort when working with new or unknown chips.

TOL-09544

Bus Pirate Cable

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable's connector is composed of two rows of five 0.1" spaced pins; it's also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The leads of the cable are terminated with female ends to mate with test hooks (coming soon!).

CAB-09556

Bus Pirate LCD Adapter v3

Control HD44780 LCDs from the Bus Pirate with this breakout board. The Bus Pirate LCD mode uses an adapter because there aren't enough pins to control a character display. You can build it with a few chips on a bread board, or you can buy this one ready-made. Includes a short connector cable. Every sale directly supports open source development of the Bus Pirate.

Bus Pirate probe kit

This is a interface cable designed for Bus Pirate which can makes it easier to connect the Bus Pirate to a circuit and get hacking.

Bus Pirate v3.6

The Bus Pirate, created by Ian Lesnet and featured on Hack a Day, is a troubleshooting tool that communicates between a PC and any embedded device over most standard serial protocols, which include I2C, SPI, and asynchronous serial - all at voltages from 0-5.5VDC. This product eliminates a ton of early prototyping effort when working with new or unknown chips.

Capacitance Meter Kit

Features:

Digital Storage Oscilloscope Kit (DSO 062)

This is small DIY DSO Kit from JYE Tech  PN: 06204KP ( with all SMD Parts mounted)

People talked about an oscilloscope for DIYers, that’s how we know about JYE tech. Mr. Liu is an admirable experienced engineer, being the first generation of university EE student after culture revolution. His seriousness on documents and every detail amazed me. You will find complete document on their website, including demos and assemle guide. We are honored to carry their products, neat and handy for Arduino level electrical development.

Digital Storage Oscilloscope Kit (DSO 09601)

DSO096 has similar structure as DSO062 but its performance has been significantly improved. Comparing to 062 DSO 096 bandwidth is 5 times wider (5M vs 1M) and sensitivity is 10 times higher (10mV vs 0.1V). Particularly, its frequency meter has been greatly enhanced. It can measure frequency higher than 20MHz at sensitivity better than 0.2Vpp (062 can only take 5 - 6 MHz signal and requires TTL level). Another big improvement is that DSO096 is battery-powered. Accepted voltage ranges from 2V to 5V so one regular 3.7V Li-ion or two 1.2V Ni-HM batteries can be used. It also comes with a built-in charger specific for 3.7V li-ion battery.

DSO BNC Probe

BNC Probe Kit for the JYETech DSO´s.

FG085 Function Generator DIY Kit

The FG085 is a low cost yet versatile function generator capable of producing signals of many different waveforms. As an easy-to-use tool operation of FG085 is very simple and straightforward. It is an ideal test/experiment tool for electronic hobbyists and students.

Frequency Counter Kit (1Hz-6MHz)

The FunCount kit from Nuxie includes everything needed to build a frequency counter capable of measuring frequencies from 1Hz to 6MHz. Perfect for use with the FunGen also available.

IC Hook with Pigtail

These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of grabbing very small points (like SOIC IC legs). Comes in a bag of five IC hooks of different colors (black, red, white, blue, and green). We use them with the Bus Pirate logic analyzer harnesses but are very cool on their own.

CAB-09741

Logic Sniffer 16-bit Input Buffer Wing

This is a A 16-bit, 5V tolerant input-only buffer for the Open Logic Sniffer logic analyzer.

Multimeter Kit

The Multimeter Kit provides you with everything you need to make your own multimeter capable of measure voltage (0-50VDC, 0.05 resolution) current (0-500mA, 1mA resolution) and resistance (0-100kΩ). The resistance mode also includes a continuity test: the buzzer will sound when the resistance probes are shorted together, this is one of the more handy tools of any multimeter.

KIT-10956

Open Logic Sniffer

The Open Workbench Logic Sniffer is an open source logic analyzer with a USB interface. The hardware is designed for the SUMP open source logic analyzer client and toolchain.

Open Logic Sniffer - Probe Cable Kit

This is the probe cable for Open workbench Logic sniffer. It has a 1×9 connector and 9 leads with tweezer-style test clips. Each cable connects 8 of the 16 buffered input channels, plus groun

Scanalogic-2 EDU-KIT - Logic Analyzer and Signal Generator

SCANALOGIC-2 EDU KIT (Educational kit) is a fun and educational kit allowing you to build a high performance logic analyzer at home! It’s an even lower cost equivalent to the SCANALOGIC-2 Logic Analyzer whose performances have been proved over the last 3 years.

Scanalogic-2 PRO Logic Analyzer and Signal Generator

Scanalogic-2 PRO is a 4 channel Logic Analyzer and Digital signal generator, specially designed to decode and analyze serial protocols like SPI, I2C, UART, 1-WIRE and CAN. Scanalogic-2 is designed to be used with the ScanaStudio software, giving your logic analyzer ever evolving capabilities.