PIC

CUI32 PIC32MX Development Stick

The CUI32 is a new version of the CREATE USB Interface, based on a 32-bit PIC. The CUI32 ships with "StickOS" installed as its default firmware - this is an full operating system (!) created by Rich Testardi with an on-board BASIC compiler, line editor, debugger, profiler, and simple file system to create new firmware programs and run them, without having to install any software on your host computer... All that's needed is a standard terminal emulator (Hyperterminal/Teraterm on windows, the "screen" command in the OS X terminal, etc.)!

DEV-09645

DLP-232PC

Measuring in at only 1.375" x 0.6", this new module is DLP's lowest cost and smallest USB to microcontroller module to date.  The DLP-232PC uses single byte commands and FTDI's Virtual COM Port (VCP) drivers to provide an easy to use USB interface to a PIC 18F2410 microcontroller.  Features include 14 I/O channels (8 can be used for analogue inputs measuring 0-5 Volts), a standard 0.3" wide DIP footprint and pre-programmed firmware for easy access to the I/Os and external digital temperature sensors (purchased separately).

IOIO for Android

The IOIO (pronounced "yo-yo") is a board specially designed to work with your Android device (OS versions 1.5 and greater). The board provides extensive and robust connectivity to an Android device via a USB connection. The IOIO is fully controllable from within an Android application, using a simple and intuitive Java API - no embedded programming or external programmer will ever be needed, even for firmware upgrades!

DEV-10748

PIC-P32MX Evalboard

The PIC32 32 bit MIPS 4K core processor from Microchip offer speed and performance at low cost. This is entry level board with PIC32MX340F512 microcontroller on it with 512 KB of Flash 32KB RAM, 80Mhz clock, UARTs, PWMs, DMAs. The board have both ICSP and JTAG connectors so it can be programmed with PIC-ICD2 or JTAG tool

PIC-WEB / PIC18F67J60 Web Server TCP-IP Eval Kit

If you want to build your own IP enabled device this is the board for you. It have PIC8F67J60 microcontroller which have integrated Ethernet MAC+PHY and comes pre-programmed with Microchips free TCP-IP stack.

PIC32-MAXI-WEB / PIC32MX795F512L Eval Kit

This board features a PIC32 processor with an embedded 100Mbps Ethernet module, allowing you to develop Ethernet applications with ease. It has everything you normally would need for such applications: Power relays which you can command via web interface, a large 240×320 TFT LCD with touchscreen support that allows you to develop complex graphical user interface applications, digital opto-isolated inputs, trimmer potentiometer, accelerometer with integrated temperature sensor, two CAN interface channels, RS232 interface, USB On-The-Go, and a microSD card slot for storing large amounts of data.

PIC32-PINGUINIO

ARDUINO like board with the PIC32MX440F256H Controller

PIC32-PINGUINIO-OTG PINGUINO MAPLE ARDUINO LIKE DEVELOPMENT BOARD

ARDUINO like board with PIC32MX440F256H with USB OTG

PIC32-Pinguino-Micro

ARDUINO like board with PIC32MX440F256H with USB OTG

PIC32-PINGUINO-MX220

ARDUINO-UNO like board with PIC32MX220F032D.
Generally this board outperform ARDUINO-UNO

USB 32-Bit Whacker - PIC32MX795 Development Board

The new version of the UBW32 now uses the PIC32MX795 IC. Based on the work of Brian Schmalz, the UBW32 is a small development board for the new PIC32MX795 32-bit CPU from Microchip. The UBW32 is breadboard friendly and includes all of the external circuitry needed to get the PIC32 up and running. Power can be provided over USB or from an external source. It has 3 push buttons (Reset, and 2 user-defined buttons) and 5 LEDs (Power, USB, and 3 user defined LEDs). All of the 78(!) of the PIC32's I/O pins are broken out. The board comes pre-loaded with a USB bootloader and special UBW firmware that accepts simple serial commands to control the various I/O functions.

DEV-09713

USB Bit Whacker - 18F2553 Development Board

The USB Bit Whacker is a spectacular little development board featuring the PIC18F2553. Based on the work of Brian Schmalz, the UBW is a small board with a command interpreter for basic input and output control. When attached to a Windows/Max OS X/Linux computer, the UBW will show up as an RS232 Com port! You control the individual I/O pins on the PIC through simple serial commands. Board comes fully tested, preprogrammed, and assembled as shown.

DEV-00762

USB Bit Whacker - 18F2553 Development Board PTH Kit

This is an easy to assemble, through-hole kit version of the popular UBW board. This is a spectacular little development board featuring the PIC18F2553. Based on the work of Brian Schmalz, the UBW is a small board with a command interpreter for basic input and output control. When attached to a Windows/Max OS X/Linux computer, the UBW will show up as an RS232 Com port! You control the individual I/O pins on the PIC through simple serial commands. This is a kit and includes a pre-programmed 18F2553 and both male and female connectors so you can choose which connector you would prefer.

DEV-08265

Web platform v1.1 Assembled

Assembled PIC 33F Web Platform, constructed from files and firmware posted by DangerousPrototypes.com.

• 80MHz/40MIPS dsPIC33FJ128GP204
• 10Mbps ethernet MAC/PHY (ENC28J60)
• microSD card holder
• 1Mbit EEPROM
• USB->serial converter (FTDI232R)
• Open source bootloader for USB firmware uploads