Breakout Board for ADMP401 MEMS Microphone

10,76 EUR

incl. 19 % VAT excl. shipping costs

weight: 0.0200 kg

Manufacturer: SparkFun

In stock: 0

Nicht auf Lager.

Nicht auf Lager.

Product.Nr.: BOB-09868
     

Product description

This tiny breakout board features the ADMP401 MEMs microphone. One of the key advantages to this breakout and microphone is the bottom ported input. This means the microphone's input can fit flush against the enclosure of your project. Plus you will not have to deal with trying to solder the microphone's wacky footprint. Wootness!

The amplifier on the breakout has a gain of 67 and more than meets the bandwidth requirements of the mic. The amplifier's AUD output will float at one half Vcc when no sound is being picked up. The amplifier produces a peak-to-peak output of about 200mV when the microphone is held at arms length and is being talked into at normal conversational volume levels. So the AUD output can easily be connected to the ADC of a micro.

Features:

  • -3dB roll off at 100Hz and 15kHz
  • 1.5 to 3.3VDC supply voltage
  • Should comfortably output 40mW
  • SNR of -62dBA

Documents:


Customers also purchased

7-Segment Serial Display blue

7-Segment Serial Display blue

14,16 EUR

Arduino Pro Mini 328 - 5V/16MHz

Arduino Pro Mini 328 - 5V/16MHz

10,76 EUR

Raspberry Pi B+/Pi2/Pi3 to Breadboard Adapter

Raspberry Pi B+/Pi2/Pi3 to Breadboard Adapter

7,00 EUR

LM35 CZ - Temperature Sensor

LM35 CZ - Temperature Sensor

3,00 EUR - 2,50 EUR