DHT22 temperature-humidity sensor + extras

11,15 EUR

incl. 19 % VAT excl. shipping costs

weight: 0.0030 kg

Manufacturer: Adafruit Industries

In stock: 99

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Product.Nr.: ADA385
     

Product description

The DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.

Simply connect the first pin on the left to 3-5V power, the second pin to your data input pin and the right most pin to ground. Although it uses a single-wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin! We have written an Arduino library with example code

Compared to the DHT11, this sensor is more precise, more accurate and works in a bigger range of temperature/humidity, but its larger and more expensive

Comes with a 4.7K - 10K resistor, which you will want to use as a pullup from the data pin to VCC.

Customers also purchased

RGB backlight negative LCD 16x2 + extras - RGB on black

RGB backlight negative LCD 16x2 + extras - RGB on black

15,64 EUR

MI0283QT Adapter v1 (inkl. 2.8

MI0283QT Adapter v1 (inkl. 2.8" LCD + Touchpanel)

30,00 EUR - 28,00 EUR

SMD-Klappbox - mittel (4 Stück)

SMD-Klappbox - mittel (4 Stück)

3,74 EUR

mSD-Shield v2 - microSD+RTC (Datenlogger Shield)

mSD-Shield v2 - microSD+RTC (Datenlogger Shield)

15,47 EUR - 13,09 EUR

Parallax PING))) Ultraschall Entfernungsmesser

Parallax PING))) Ultraschall Entfernungsmesser

33,32 EUR