38Khz Infrared Receiver

This component is used to detect infrared signals of 38kHz carrier.
The sensor output is logical High when it detects 38kHz frequency otherwise the output is Low.
It can be used to detect the signal sent by the ER-4 Easy Remote (not included) or most TV remotes. It is connected through a standard JST3AA cable (included).

5x Breakout Module Set

Accelerometer Module

ALFAT OEM Board

Thanks to ALFAT chipset at its core, ALFAT OEM board offers a seamless way to access files on SD & MMC cards and on USB memory drives. Simple commands are used on UART (serial), SPI or I2C to access files at high rates. Rates are as high as 4000K Bytes/sec on SD and as high as 4000K Bytes/sec on USB memory.

ALFAT SD Board

Thanks to ALFAT chipset at its core, ALFAT OEM board offers a seamless way to access files on SD & MMC cards. Simple commands are used on UART (serial), SPI or I2C to access files at high rates. Rates are as high as 4000K Bytes/sec.

ALFAT SoC Processor

ALFAT SoC processor offers a seamless way to access files on SD & MMC cards and on USB memory drives. Simple commands are used on UART (serial), SPI or I2C to access files at high rates. Rates are as high as 4000K Bytes/sec on SD and as high as 4000K Bytes/sec on USB memory.

Barometer Module

Bluetooth Module

Button

Connect this button to a digital pin to read its status. Additionally, the board includes a small LED that is automatically lit when the button is pressed.
The output of this component is low when the button is pressed and high otherwise.
It is connected through a standard JST3AA cable (included).

Button Module

Button Module for Gadgeteer-compatible devices. This module is equipted with an on-board configurable LED.

Camera Module

This USB Camera Module can stream images as large as 320x240 with up to 20fps on smaller images.

CAN DW Module

Cellular Radio Module

Character Display Module

ChipworkX Development System

ChipworkX Development System is the official kit from GHI Electronics for ChipworkX Module. This kit exposes various peripherals and interfaces that make it an ideal fast start for any project with .NET Micro Framework. Furthermore, most of ChipworkX module signals such as GPIO, SPI and UART are exposed on 0.1" header pins for easier prototyping.

Compass Module

This module is designed for low field magnetic sensing with a I2C interface for applications such as compassing and magnetometry with 1°to 2°heading accuracy.  It is Suitable for applications like navigation systems and consumer electronics.

Current Module

Display CP7 Module

7-inch 800x480 full-color display with capacitive multi-touch screen.

• Socket: R,G,B, and I
  
• Size: 193mm x 110mm
  
• Weight: 239g 
  
• 3.3V  Consumption : 50mA
• 5V Consumption: 700mA
• Includes four Gadgeteer cables

Display T35 Module

320x240 3.5" Color Display Module with a Touch Screen.

Display TE35 Module

320x240 3.5" Color Display Module with a Touch Screen.

DL40 Module (DaisyLink)

This module has a 40pin DIP package outline, making it easy to plug in 40DIP socket or a prototyping breadboard. The module includes 2 header and 50Mhz 32bit processor. Combined with the generic DasyLink drivers found on mainboards, creating new DasyLink is a simple plug and play.

E-Block 3-pin Shield

This shield provides an array of simple connections for our growing list of 3-pin E-Blocks.

eblock Expansion Module

GHI's catalog is full of 3-pin eblocks. Those eblocks can be connected to any Gadgeteer mainboard using this extension. Note that you will need to use the drivers from the eblock page you are trying to use.

eblock Kit

Save more than 50% for a limited time, and take advantage of this special eblocks kit and empower your gadgeteer mainboard with plenty of options.

EMX Development System

The EMX Development System is the official kit from GHI Electronics for the EMX module. EMX offers high performance and extensive capabilities. This kit exposes the various peripherals and interfaces that make it an ideal starting point for any .NET Micro Framework project. The EMX module signals such as GPIO, SPI and UART are accessible on a 0.1" header for rapid prototyping.

EMX Module

EMX™ is a combination of hardware (ARM Processor, Flash, RAM, Ethernet PHY...etc) on a very small (1.55" x 1.8") SMT OEM 8-Layer board that hosts Microsoft .NET Micro Framework with various PAL/HAL drivers. EMX includes GHI's exclusive software and hardware features such as support for USB host, PPP networking, and more.

Ethernet ENC28 Module

This Ethernet Module gives a Gadgeteer mainboard instant access to networks and the internet. Not all Ethernet modules work on every board. This module is designed to work with SPI-based Ethernet support. This module is compatible with GHI's FEZ Hydra mainboard, FEZ Cerberus mainboard and FEZ Cerbuino Bee.

Ethernet J11D Module

This Ethernet Module gives a Gadgeteer mainboard an instant access to networks and internet. Not all Ethernet modules work on all boards. Make sure this module is compatible with your mainboard. This module is compatible with GHI's Spider mainboard.

Extender Module

Need a really long cable? Use this extender to connect 2 cables. The Extender Module also exposes all signals allowing for signal tracing or for inserting a module into a breadboard. If used with breadboard, a 0.1" header (not included) needs to be soldered on the module.

FEZ Cerb40 II

FEZ Cerb40 II is 100% open source hardware board that combines the FEZ Cerberus' 32-bit 168MHz processor and core NETMF software on a very small Sysytem on Module, in a DIP40 format. This board is ideal for low-volume production run and for easy prototyping. Developers normally start with FEZ Cerberus mainboard for easy plug-and-play and then later use FEZ Cerb40 to live permanently in a product.

FEZ Cerberus Basic Kit

FEZ Cerberus Basic Kit includes the essential modules needed to run FEZ Cerberus mainboard. This kit is targeted for contributors.

FEZ Cerbot - Assembled

The simplicity of programming the FEZ Cerbot using Microsoft's Visual Studio's .NETMF. makes it ideal for young adults and schools. The expandability of the FEZ Cerbot, through .NET Gadgeteer sockets, makes it ideal for advanced users and universities.

FEZ Cerbot - Unassembled

FEZ Cerbuino Bee

FEZ Cerbuino is for developers wanting a low-cost Arduino-comaptible Gadgeteer-compatible mainboard. This 100% open-source (OSHW) offer includes an on-board power connector, voltage regulators, MicroSD connector, USB host and USB Client connectors. Ready to plug-and-play using the included USB cable. The power of .NET Gadgeteer platform sockets is found on FEZ Cerbuino. These 3 gadgeteer-compatible sockets allow developers to seamlessly connect almost any of the Gadgeteer modules.  

FEZ Cobra II (Eco)

This is the same as FEZ Cobra II (WiFi) but without WiFi. Please see FEZ Cobra II (WiFi) page for more details. Wired Ethernet can be easily added using ENC28 Module.

FEZ Cobra II (WiFi)

FEZ Cobra II (WiFi) is an OEM board running .NET Micro Framework, which allows users to program the board from Microsoft's Visual Studio using C# or Visual Basic. With a G120 Module at its core, users can use all our premium library features on the FEZ Cobra II.

FEZ Domino

FEZ Domino is same as FEZ Panda II but it also includes USB Host support, perfect for android accessory.FEZ Domino includes GHI's premium libraries support on NETMF 4.1.

FEZ Hydra Basic Kit

FEZ Hydra Basic Kit includes the essential modules needed to get started with FEZ Hydra.

• FEZ Hydra Mainboard
• USB Client SP Module
• LED7R Module
• Joystick Module
  
• LightSense Module 
• USB Cable

FEZ Hydra Kiosk Kit

In this kit, the powerful FEZ Hydra is combined with a video out module allowing users to connect monitors and TVs, even large 80' TV! All you need is a VGA input. The included music module can decode WMA, MP3, MIDI and more. It can work directly with headphones or add amplified speakers (PC speakers).

FEZ Hydra Mainboard

FEZ Hydra is a 100% open-source (hardware and software) .NET Gadgeteer compatible mainboard running .NET Micro Framework. It incorporates a 240Mhz AT91SAMRL ARM9 processor. With 16MB of SDRAM an 4MB of FLASH, FEZ Hydra is capable or running the most complex applications.

This board is included in FEZ Hydra Basic Kit.

FEZ Rhino

The FEZ Rhino is an OEM board with a 72Mhz ARM7 processor running .NET Micro Framework. This allows developers to program this processor and debug the application code through Microsoft's Visual C# .

FEZ Rhino OEM Box

FEZ Rhino Box is a read-to-ship product, you only need to add a sticker with your company name and logo. It come completely assembled, with display and Ethernet. Once side of the enclosure include all connectors while the other side is left blank leaving room for customization. There is even room inside to add additional circuit board.

FEZ Spider Mainboard

FEZ Spider Mainboard is a .NET Gadgeteer-compatible mainboard based on GHI Electronics EMX module. This makes FEZ Spider Mainboard the most feature-full .NET Gadgeteer compatible device in the market. It contains all of .NET Micro Framework core features and adds many exclusive features, such as USB host, WiFi and RLP (loading native code). All these features combine to provide a rapid prototyping platform.

FEZ Spider Starter Kit

FEZ Spider Starter Kit is the first commercially available .NET Gadgeteer-compatible kit. it includes everything necessary for educators, hobbyists and even professionals. Embedded development is fast & easy (FEZ) thanks to .NET Micro Framework, .NET Gadgeteer and the numerous GHI value added features such as WiFi and USB Host.

GHI-SPDRS-GK-297

FEZ Touch

This 2.4 inch TFT display has full 16-bit color graphics at 240x320 pixels. The touch screen panel makes it ideal for compact user interface. The display is directly supported with FEZ Panda II. Plug and play in the 40 pin female header. Display may still work with other platforms like FEZ Domino but wiring will be required.Note that FEZ Panda (based on USBizi chipset) doesn't have

G120 Module

G120 is a small (26.67 mm x 38.1mm) surface-mount System on Module (SoM) hosting a 120 Mhz. ARM Cortex-M3 Processor with 4.5 MB Flash and 16 MB RAM that runs Microsoft .NET Micro Framework (NETMF). Our SoMs include a Premium Library that extends the NETMF core with many of our exclusive features.

G120HDR Module Rev2

G120HDR Module is a through-hole version of G120 Module. All signals are exposed on header placement, including display signals. The module only needs 3.3V to operate.

Gadgeteer Assorted Cables

Gadgeteer Cable Pack

GPS Module