Product from HAOYU Electronics

10.1" 1024x600 TFT Display with capacitive Touchscreen

HY101CTP - 10.1" 1024x600 TFT LCD Display with capacitive touchpanel (FT5406)

72,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



5" 800x480 TFT Display with capacitive Touchscreen

HY050CTP-HD - 5" 800x480 TFT LCD Display with capacitive touchpanel (FT5206)

35,70 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

5" 800x480 TFT Display with capacitive Touchscreen + FTDI FT811 EVE

The FT811CB is a development module for FTDI’s FT811, which is used to develop and demonstrate the functionality of the FT811 Embedded Video Engine, EVE.
The modules contains an FT811Q graphic controller and a 5" TFT color display with 800×480-pixel resolution.

42,66 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

7" 1024x600 IPS TFT Display with capacitive touch (Type C)

HY070CTP-HD-RGB IPS - 7" inch 1024x600 TFT LCD Display (IPS Panel) with capacitive touchpanel (FT5206)

54,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

7" 1024x600 TFT Display with capacitive Touchscreen

HY070CTP-HD - 7" inch 1024x600 TFT LCD Display with capacitive touchpanel (FT5206)

49,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

7" 800x480 TFT Display with capacitive Touchscreen

HY070CTP - 7" 800x480 TFT LCD Display with capacitive touchpanel (FT5206)

43,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

CE8301 - 5V USB Output Boost Regulator (0.9V-5V Input)

Fixed 5V Output Boost Regulator (step-up regulator) Module with standard USB Connector. Accepts Input voltage from 0.9V to upto 5V.

1,95 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Gas Sensor Carbon Monoxide & Flammable Gas (MQ-9)

The Analog CO/Combustible Gas Sensor(MQ9) module is useful for gas leakage detecting, it used the sensitive material SnO2, which with lower conductivity in clean air. It make detection by method of cycle high and low temperature, and detect CO when low temperature (heated by 1.5V).

3,57 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Gas Sensor for Air Qaulity (MQ135)

Sensitive material of MQ135 gas sensor is SnO2, which with lower conductivity in clean air. When the target combustible gas exist, The sensors conductivity is more higher along with the gas concentration rising.

2,98 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Gas Sensor LPG, i-butane, Methane, Alcohol, Hydrogen (MQ5)

The MQ5 Gas Sensor module is useful for gas leakage detecting. It can detect LPG, i-butane, methane, alcohol, Hydrogen, smoke and so on. The sensitivity can be adjusted using the on-board potentiometer, and you'd use this sensor by reading the analog pin to which it is connected. Please use these sensors only in controlled experiments! Combustible gases and fumes are very dangerous! Here are details for some MQ gas sensor.

2,98 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Gas Sensor Smoke/LPG/CO (MQ2)

The Analog Smoke/LPG/CO Gas Sensor(MQ2) module utilizes an MQ-2 as the sensitive component and has a protection resistor and an adjustable resistor on board. The MQ-2 gas sensor is sensitive to LPG, i-butane, propane, methane, alcohol, Hydrogen and smoke. It could be used in gas leakage detecting equipments in family and industry. The resistance of the sensitive component changes as the concentration of the target gas changes.

2,98 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

HY-LPC1768-Mini-DK2 Development Kit + 2.8" TFT LCD

LPC1768-Mini-DK2 is a small evaluation board production by Haoyu electronic, it based on the NXP (NXP Semiconductors) LPC1700 series processors (Cortex-M3 core).

LPC1768-Mini-DK2 clock can be set up to 100MHZ, it contains an Ethernet interface, USB HOST / device interface, UART interface, SPI  LCD interface,  16-bit parallel LCD interface(more faster).

39,95 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



HY-MiniSTM32V Development Kit + 3.2" TFT Display

STM32 Development Kit with 3.2" TFT Touch-Display

35,95 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

MAX II EPM240 CPLD Dev Board

This is a smallest system includes power, clock, RST circuit, and all pins layout for MAX II EPM240 chip. You can use it as a EPM240 CPLD development platform for your CPLD project.

14,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Mifare RFID (13.56 MHz) RC522 Reader Module

Mifare RC522 is the high integrated RFID card reader which works on non-contact 13.56MHz communication, is designed as a low power consumption, low cost and compact size read and write chip, is the best choice in the development of smart meters and portable hand-held devices.

4,95 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

MP1584 1-18V (3A) Step-Down Regulator

This DC/DC step-down voltage converter is based on MP1584, it converts input voltage between 4.5V and 28V into a smaller voltage between 0.8V and 18V, capable of driving a 3A load with excellent line and load regulation.

2,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

MP2307 1-17V (1.8A) Step-Down Regulator

This DC/DC step-down voltage converter is based on MP2037, it converts input voltage between 4.5V and 23V into a smaller voltage between 1V and 17V, capable of driving a 1.8A load with excellent line and load regulation.

2,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

MPU6050 3-Axis Acceleration + Gyroscope 6-DOF IMU

The MPU-6050 contains both a 3-Axis Gyroscope and a 3-Axis accelerometer allowing measurements of both independently, but all based around the same axes, thus eliminating the problems of cross-axis errors when using separate devices.

4,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

MPU9255 3-Axis Acceleration + Gyroscope + Magnetometer 9-DOF IMU

The MPU-9250 is a 9-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and a Digital Motion Processor™ (DMP) all in a small 3x3x1mm package available as a pin-compatible upgrade from the MPU-6515.

9,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

OV7670 Kamera Module with the AL433 FIFO

The OV7670 is a low cost image sensor + DSP that can operate at a maximum of 30 fps and 640 x 480 ("VGA") resolutions, equivalent to 0.3 Megapixels. The captured image can be pre-processed by the DSP before sending it out. This preprocessing can be configured via the Serial Camera Control Bus (SCCB). It's very useful for Electronic lovers, you can use the camera with STM32 or even with Arduino.

14,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

PIR Motion/Human Sensor HC-SR501

Human Sensor Module Pyroelectric Infrared
Operating volatage range: DC 4.5-20V

3,00 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



PIR Motion/Human Sensor Mini HC-SR505

HC-SR505 Mini PIR Motion Sensor is based on infrared technology and it can automatic control by itself with high sensitivity and high reliability. Because of the minimum size and low-power operation mode, it widely used in various of automatic electronic equipment, especially battery-powered automatic products.

3,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Relay Module (4-Channel 10A)

A Relay is a digital switch to control much higher voltages and currents than your normal Arduino boards does. When inputs a logic voltage, the relay will switch to allow current to flow or cutoff, depending on your wiring. A Relay usually consists of a coil, 1 common terminal, 1 normally closed terminal and one normally open terminal. When the coil is energized, the common terminal and the normally open terminal will have continuity.

4,85 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Serial MP3 Player Board (YX5200-24SS)

DFPlayer Mini is a compact and inexpensive MP3 module that can be connected directly to the speaker. Module can be used alone with battery power supply, speaker and keypad, or through the serial port control, as the Arduino UNO or any microcontroller with a serial port module. The module itself perfectly integrated hardware decode MP3, WAV, WMA's. While the software supports TF card driver to support FAT16, FAT32 file system. Can be done by simple serial command plays the specified music, as well as how to play music and other functions, easy to use, stable and reliable!

4,95 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Stereo 3W Audio Amplifier Board - PAM8403

- Power: DC 3.6V - 5.5V
- Output power: 3W +3 W
- Signal-to-noise ratio: 90dB
- Efficiency:> 90%

1,85 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

STM32F030F4P6 ARM Cortex-M0 Development Board

This board is a STM32F030F4P6 Minimum Systerm Board(Cortex-M0). The target MCU is STM32F030F4P6 that is provided by ST. It is a ARM 32-bit Cortex™-M0 CPU, frequency up to 48 MHz, high-speed embedded memories . As a minimal ready-to-run system, this board integrates micorUSB power supply interface, ISP/SWD programming/debugging interface, boot mode selection and so on to take you into the ARMCortex world easy.

4,25 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

STM32F103C8T6 ARM Cortex-M3 Development Board

New STM32 Minimum System Development Board Module For Arduino - STM32F103C8T6, A Medium-density performance line ARM-based 32-bit MCU with 64 KB Flash, USB, CAN, 7 timers, 2 ADCs, 9 communication interfaces. Let’s begin our Arduino work by using it.

4,85 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

STM32F103TBU6 ARM Cortex-M3 Development Board

HY-TinySTM103T is entry level development board for the ARM Cortex M3 family of devices produced by ST Microelectronics Inc. With HY-TinySTM103T you can explore the features of STM32 family on budget, the board have everything necessary to build simple applications: USB port where power is taken and power supply circuit, reset and oscillator circuits, SWD/ISP for programming and debugging, one status LEDs and reset button.

4,65 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

STM32F103ZET6 Minimum System Board

This board is a small STM32 development board that features an STM32F103ZET6 device as the microcontroller, supports further expansion. It is ideal for starting application development with STM32F family.

17,85 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

TCS3200 Color Sensor Module

TCS3200 chip is designed to detect the color of light incident on it. It has an array of photodiode (a matrix of 8x8, so a total 64 sensors).

4,76 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

TDA8932 - Mono 35W Audio Amplifier Board

The board uses a high-performance digital amplifier chip TDA8932, small size, high efficiency, high power, good sound quality, without additional installation of heat sink, very suitable for passive speaker transformation.

6,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

TP4056 - Micro USB 5V 1A Lithium Battery Charger with Protection

This tiny module is perfect for charging single cell 3.7V 1 Ah or higher LiPo cells such as 16550s that don't have their own protection circuit.

2,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Ultra Sonic range measurement module HC-SR04

Ultrasonic ranging module HC - SR04 provides 2cm - 400cm non-contact
measurement function, the ranging accuracy can reach to about 3mm. The modules includes ultrasonic transmitters, receiver and control circuit.

3,65 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.