Product from Olimex

7" LCD for A13-OLinuXino - A13-LCD7

7 inch LCD display for and tested with A13-OLinuXino

7" LCD with Touch - A13-LCD7-TS

7 inch LCD display with resistive touch screen panel suitable for and tested with A13-OLinuXino

A13-OLinuXino-WiFi

A13-OLinuXino is a low-cost single-board Linux computer in a very compact nano-ITX form. It uses the very first Cortex A8 processor available in eLQFP176 package, produced by Allwinner Technology Inc A13.

ARM-JTAG-20-10 / 20 - 10 Pin adapter

JTAG 20 PIN 0.1" TO 10 PIN 0.05" ADAPTER

ARM-JTAG-SWD

ARM JTAG SWD Adapter for OpenOCD and Roley Crossworks

ARM-USB-OCD-H JTAG Debugger/Programmer

High Speed 3-in-1 Fast USB ARM JTAG, USB-to-RS232 virtual Port and power supply 5VDC device (Supported by OpenOCD and other OpenSource Debuggers)

ARM-USB-TINY-H JTAG Debugger/Programmer

Low Cost High Speed JTAG Debugger (OpenOCD compatible)

AVR-CAN - AT90CAN128 dev kit

AVR-CAN is inexpensive way to learn AT90CAN128 microcontroller from Atmel. It's in very compact form 60x55mm and the presence of both CAN and RS232 allow the customer to make bridge between UART and CAN networks. All AVR pins are available on extension connectors and the board can be easy snap-on prototype or other mother board where additional circuits are built.

AVR-ISP500 - AVR Programmer

AVR-ISP500 is fast and reliable USB AVR programmer, working directly with AVR Studio. It si recognized as STK500 programmer and programs all AVRs. As it used USB CDC no need for drivers and works under Windows, Linux and MacOS. If you do not want to use AVRStudio you can use AVR-ISP500 with AVR Dude.

AVR-MT-128

DEVELOPMENT BOARD FOR ATMEGA128 AVR MICROCONTROLLER WITH JTAG AND STKxxx COMPATIBLE 10 PIN ICS.

AVR-P28 - AVR Development Board

AVR Development Board for 28 pin AVR controller

AVR-P28-8MHz - Proto Board for 28 Pin Atmel AVR

AVR microcontroller prototype board for 28 pin devices with STKxxx compatible 10 pin ICSP

AVR-T32U4

ARDUINO Leonardo like board with ATMEGA32U4.

Box-Duinomite-Mega

Plastic box for DuinoMite-Mega

Development Prototype Board For LPC1227

LPC-P1227 DEVELOPMENT PROTOTYPE BOARD FOR LPC1227 CORTEX M0 ARM MICROCONTROLLER

DuinoMite

IS MAXIMITE BASIC COMPUTER BUT IN ARDUINO LIKE LAYOUT

DUINOMITE-eMEGA

DuinoMite is a Maximite Compatible Basic computer, originally designed by Geoff Graham, with additional features and Arduino like layout. DuinoMite allow you to program in BASIC language and have VGA and Keyboard interface, so you can develop and write your code in Basic without need of any computer. You can store your code on the SD-CARD and to execute it on power up thorugh autoexec.bas main code.

DuinoMite-IO

INPUT-OUTPUT BOARD FOR DUINOMITE

DuinoMite-Mega

DuinoMite is a Maximite Compatible Basic computer, originally designed by Geoff Graham, with additional features and Arduino like layout. DuinoMite allow you to program in BASIC language and have VGA and Keyboard interface, so you can develop and write your code in Basic without need of any computer. You can store your code on the SD-CARD and to execute it on power up thorugh autoexec.bas main code.

DuinoMite-Mini

MAXIMITE BASIC COMPUTER IN SMALL COMPACT FORM

DuinoMite-Shield

ARDUINO LIKE SHIELD FOR DUINOMITE 26 PIN CONNECTOR

iMX233-OLinuXino-Maxi

iMX233-OLinuXino is Industrial grade Single Board Linux computer in very compact form.

iMX233-OLinuXino-Micro

iMX233-OLinuXino-Micro is Single Board Linux computer in very compact form.

iMX233-OLinuXino-SD

Memory Card with the Linux image

LPC3131 Eval Kit (LPC-H3131)

 Olimex Eval Kit with LPC 3131 ARM9 controller.

MOD-EKG Heart-Rate and EKG Monitor

Heart-Rate and EKG Monitor Using the MSP430FG439 development board

MOD-GSM / Quad Band GSM/GPRS Module

This is an extension module for Olimex Eval boards with 'UEXT' connectors on them. Simply plug this board on, and your host board's processor can communicate to the GPRS cellular module.

MOD-IO

MOD-IO is stackable development board which add analog and digital inputs and outputs to any of our development boards with UEXT. If you work with any of our development boards with UEXT connector and you need more digital and analog iniputs and outputs you can add these by connecting MOD-IO to your development board. This board allow easy interfacing to 4 relays, 4 optoisolated digitl inputs, 4 analog inputs. MOD-IO is stackable and addressable, what does this means? these boards can plug together so you can add as many as you want input and outputs! i.e. 8, 12 etc! MOD-IO have ATmega16 microcontroller and the firmware is available for modification.

MOD-IO2

MOD-IO2 is stackable development board which adds RELAYs and GPIOs to any of our development boards with UEXT. If you work with any of our development boards with UEXT connector and you need more GPIOs and/or RELAY outputs you can add these by connecting MOD-IO2 to your development board. This board allows easy way to interface up to 2 relays and 7 GPIOs. MOD-IO2 is stackable and addressable, what does this means? These boards can stack together so you can add as many input and outputs as you want! E.g. 2-4-6-8 etc.! MOD-IO2 has PIC16F1503 microcontroller and the firmware is available for modification.

MOD-LCD3310

MOD-LCD3310 is development board with UEXT universal connector and can be attached and add LCD functionality to all other development boards with this connector.

MOD-LCD4.3

LPC1788 development board with 96MB SDRAM, 4.3"LCD, SD-CARD, UEXT - perfect solution for industrial panels

MOD-MP3-X / VS1053 MP3 decoder board

The MOD-MP3-X is a ready to use VS1053 MP3 decoder board. It includes an SD socket, voltage regulation, and audio jacks. Add your choice of controllers and you've got a configurable MP3 player!

MOD-PULSE Pulseometer / Heart-rate monitor

PULSEOXMETER AND HEART-RATE MONITOR Using the MSP430FG439 development board

MOD-RS485 - RS485 Option for Olimex boards

MOD-RS485 is a small module board realized with ADM3483ARZ - low power, differential line transceiver designed to operate using a single 3.3 V power supply, for half-duplex communication. This module can be used to convert RS232 signals into RS485 signals. The board comes with 10 pin cable for the UEXT, via which it can be connected to each of our development boards with UEXT on it. This module is an excellent choice for conveying information over long distances, allowing error-free data transmission at data rates up to 250 kbps.

MOD-RS485-ISO

With this module you can easily interface our development boards with UEXT to industrial networks with RS485 interface, metering instruments etc.
MOD-RS485-ISO uses ISO35T from Texas INstruments and offers 3000V galvano isolation RS485/RS422 interface. This module can be used to convert RS232 signals into RS485/RS422 signals. The board comes with 10 pin cable for the UEXT, via which it can be connected to each of our development boards with UEXT on it. This module is an excellent choice for conveying information over long distances, allowing error-free data transmission.

FEATURES:

• ISO35T converter from Texas Instruments
• UEXT connector
• RS485 connector full duplex
• FR-4, 1.5 mm, soldermask, component print
• Dimensions: 58x30 mm (2.3 x 1.2")

• MOD-RS485-ISO.pdf user manual

• MOD-RS485-ISO schematic

• MOD-RS485-ISO + PIC-P26J50 demo code
• MOD-RS485-ISO example for I2C + OLIMEXINO-328 - instructions in the archive

MOD-RTC PCF8536 and UEXT

MOD-RTC add real time clock feature to boards with UEXT connector . The time keeping accuracy is tuned to 2 seconds per day, more accurate tuning is possible by adjusting the internal PCF8536 registers.

MOD-TC-MK2-31855

K-Type thermocouple interface board with PIC16F1503, MAX31855, UEXT and 0.1'' ICSP connector

MOD-WIFI - WiFi Option for Olimex boards

MOD-WIFI allows wireless internet access for every OLIMEX's board with UEXT connector

MSP430-5438STK / MPS430F5438 Starterkit

This powerfull microcontroller board supports various serial interfaces such as USB Device, UART, and SPI. In addition, this one provides audio input and output, debug interface, LCD (Nokia 3310 LCD), universal expansion connector, two GPIO extension headers, microSD card slot, user joystick, user LEDs, and a Reset button.

MSP430-CCRF 868 / 915MHz transciever module - CC430F5137

868 / 915MHZ TRANSCIEVER MODULE WITH CC430F5137

MSP430-easyWeb2

Olimex easyWEB2 with MSP430F149 controller.

MSP430-P149 MPS430F149 DEVELOPMENT BOARD

Small dev kit with the MPS430F149

MSP430-P249 MPS430F249 DEVELOPMENT BOARD

Small dev kit with the MPS430F249

Olimexino-328

ARDUINO like board with ATMEGA328.

Olimexino-32U4 (Arduino Leonardo compatible)

ARDUINO Leonardo like board with ATMEGA32U4.

Olimexino-STM32 (MAPLE compatible)

ARDUINO / MAPLE like board with STM32F103RBT6.

PIC-ICD2-POCKET - PIC ICD2 Debugger and Programmer

PIC-ICD2-POCKET is the world's smallest PIC ICD2 debugger and programmer, with only 55 x 55 mm (2.16 x 2.16") dimensions and only 30gr weight (without ICSP cable and packing) this little device fits in your pocket and is very convenient to carry with you when you work in field.

PIC-ICSP Adapter

Allmost all Olimex boards are with simple 0.1" ICSP connector. Microchip decided to use phone jack cable for their tools and boards which is huge. The new mini boards where space is critical can't use both of these so we introduced the new ICSP-mini connector with 0.05" step. PIC-ICSP is 3-way connector which allow bridging between the development tools which use different connectors.

PIC-KIT3

PIC-KIT3 is a low cost programmer/debugger. With its 55 x 55 mm (2.16 x 2.16") dimensions and only 30 grams of weight (excluding the ICSP cable and packing) this little device fits your pocket and is very convenient to carry around when working in field.

PIC-LCD / PIC18LF8490 Eval-Kit

Evalboard with PIC18LF8490 microcontroller and LCD