Product from PJRC

Teensy Audio Adaptor Board for Teensy 3.0 & 3.1

This audio adaptor lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with Teensy 3.0 or 3.1. It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input.

16,00 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Teensy Micro SD Card Adapter

This Micro SD card adaptor allows you to easily use gigabytes of flash memory with Teensy. It can also be used on a breadboard, or with almost any AVR processor.

8,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Teensy MINI54 Chip for DIY Teensy 3.0

For developing projects, we highly recommend you use a Teensy board to get your code working.

But using this chip and a blank MK20DX128VLH5 or MK20DX256VLH7, you can build your own Do-It-Yourself board that's compatible with Teensyduino and Teensy Loader. Either chip will work. The MINI54 will automatically detech which chip you've used and implement either Teensy 3.0 or Teensy 3.1.

These chips can also be very useful for modest volume production of a fully custom product developed using Teensy 3.0 or Teensy 3.1.

8,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Teensy OctoWS2811 Adaptor for Teensy v3.1

This adaptor board connects Teensy 3.1 to thousands of LEDs using the OctoWS2811 Library.

The adaptor features a 74HCT245 buffer chip and 100 ohm impedance matching resistors. CAT6 Ethernet cable is used from this board to the LED strips.

11,07 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Teensy Prop Shield (with Motion Sensors)

The Prop Shield is meant for making interactive light and sound effects on small handheld props and wearable costumes.

21,10 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Teensy Prop Shield (without Motion Sensors)

This low-cost Prop Shield is meant for making light and sound effects on small handheld props and wearable costumes.

9,09 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Teensy to XBee Adaptor Kit

This kit lets you easily connect Teensy to a XBee wireless module.

The Arduino XBee Library is fully compatible.

6,37 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Teensy v2.0 USB Board - ATmega32U4 AVR

The Teensy USB Development Board is a complete USB-based microcontoller development system. Only a standard Mini-B USB cable (sold separately) is needed to connect to a PC or Macintosh.

All Teensy boards are shipped assembled and fully tested.

Actual size is 1.2 by 0.7 inch

17,61 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Teensy v2.0 USB Board with Pins - ATmega32U4 AVR

The Teensy USB Development Board is a complete USB-based microcontoller development system. Only a standard Mini-B USB cable (sold separately) is needed to connect to a PC or Macintosh.

All Teensy boards are shipped assembled and fully tested.

Actual size is 1.2 by 0.7 inch

20,19 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Teensy v3.0 USB Board - MK20DX128 ARM Cortex-M4

Replacement: Teensy 3.2

The Teensy USB Development Board is a complete USB-based microcontoller development system.

Version 3.0 features a 32 bit ARM processor.

All Teensy boards are shipped assembled and fully tested.

Actual size is 1.4 by 0.7 inch

17,85 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Teensy v3.1 USB Board - MK20DX256 ARM Cortex-M4

Replacement: Teensy 3.2

Teensy 3.1 has the same size, shape & pinout; is compatible with code written for Teensy 3.0, and is well supported on the Arduino IDE using Teensyduino. Teensy 3.1 adds several new features, due to an upgraded microcontroller. Here are the highlights. A table of technical specifications is show below.

21,84 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Teensy v3.1 USB Board with Pins - MK20DX256 ARM Cortex-M4

Replacement: Teensy v3.2 USB Board with Pins - MK20DX256 ARM Cortex-M4

Teensy 3.1 has the same size, shape & pinout; is compatible with code written for Teensy 3.0, and is well supported on the Arduino IDE using Teensyduino. Teensy 3.1 adds several new features, due to an upgraded microcontroller. Here are the highlights. A table of technical specifications is show below.

25,23 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Teensy v3.2 USB Board - MK20DX256 ARM Cortex-M4

The Teensy USB Development Board is a complete USB-based microcontoller development system.

Teensy 3.2 is a direct, 100% compatible replacement for Teensy 3.1. It is fully compatible with all shields and add-on boards made for Teensy 3.1, including the Audio Board and OctoWS2811 Adaptor.

21,84 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Teensy v3.2 USB Board with Pins - MK20DX256 ARM Cortex-M4

The Teensy USB Development Board is a complete USB-based microcontoller development system.

Teensy 3.2 is a direct, 100% compatible replacement for Teensy 3.1. It is fully compatible with all shields and add-on boards made for Teensy 3.1, including the Audio Board and OctoWS2811 Adaptor.

23,80 EUR incl. 19 % VAT excl. shipping costs

Nicht auf Lager.



Teensy v3.5 USB Board - ARM Cortex-M4

The Teensy USB Development Board is a complete USB-based microcontoller development system.

Version 3.5 features a 32 bit 120 MHz ARM Cortex-M4 processor with floating point unit. All digital pins are 5 volt tolerant.

26,30 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Teensy v3.6 USB Board - ARM Cortex-M4

The Teensy USB Development Board is a complete USB-based microcontoller development system.

Version 3.6 features a 32 bit 180 MHz ARM Cortex-M4 processor with floating point unit. All digital and analog pins are 3.3 volts. Do not apply more than 3.3V to any signal pin.

31,65 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Teensy WIZ812 Ethernet Adaptor Kit

This kit lets you easily connect Teensy to a WIZ812 ethernet module.

7,97 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Teensy WIZ820io & Micro SD Card Adaptor

This adaptor allows you to easily use gigabytes of SD card flash memory and/or a Wiznet WIZ820io ethernet module with Teensy.

6,60 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Teensy++ v2.0 USB Board - AT90USB1286 AVR

The Teensy++ USB Development Board standard Mini-B USB cable (sold separately) is needed to connect to a PC or Macintosh.

All Teensy boards are shipped assembled and fully tested.

25,50 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Teensy++ v2.0 USB Board with Pins - AT90USB1286 AVR

The Teensy++ USB Development Board is a complete USB-based microcontoller development system. Only a standard Mini-B USB cable (sold separately) is needed to connect to a PC or Macintosh.

28,69 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.

Teensy-LC USB Board - MKL26Z64 ARM Cortex-M0+

Teensy-LC delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM Cortex-M0+ processor at 48 MHz, 62K Flash, 8K RAM, 12 bit analog input & output, hardware Serial, SPI & I2C, USB, and a total of 27 I/O pins.

12,49 EUR incl. 19 % VAT excl. shipping costs

Lagernd, versandfertig in 24 Stunden.