Pycom SiPy (MicroPython) - ESP32 (WiFi+BLE) + Sigfox

35,64 EUR

incl. 19 % VAT excl. shipping costs

weight: 0.0070 kg

In stock: 14

Lagernd, versandfertig in 24 Stunden.

Lagernd, versandfertig in 24 Stunden.

Product.Nr.: 20170028
     

Product description

The SiPy is a triple bearer MicroPython enabled micro controller  – perfect enterprise grade IoT platform for your connected Things. With the latest Espressif ESP32 chipset the SiPy offers a perfect combination of power, friendliness and flexibility. Create and connect you things everywhere. Fast. Our module is CE, FCC, IC and RCM certified!

The SiPy a multi-network (Sigfox, WiFi and BLE) development platform. It is programmable with MicroPython and the Pymakr IDE for fast IoT application development, easy programming in-field and extra resilience with network failover. The best blend of speed to deployment and access to new LPWAN networks rolling out across Europe, USA, Africa and India. You can also configure the SiPy in FSK mode to send packets directly from SiPy to SiPy. This way you can create the network configuration of your choice and then use another SiPy as central Nano-Gateway to forward the data to the cloud via WiFi. Our module is CE, FCC, IC and RCM certified!

The board ships with or without male headers mounted as seen on the pictures.

NOTE: Using the Sigfox radio without the external antenna can lead to damage of the device and is therefore not recommended.

PLEASE NOTE: Pycom modules are powered by the NEW and FEATURE PACKED Espressif ESP32 chip. As a result our firmware is evolving constantly as the ESP32 IDF matures. Regular firmware updates are therefore provided.

SiPy Features

– Powerful CPU, BLE and state of the art WiFi radio
– 1KM WiFi range
– MicroPython enabled
– Fits in a standard breadboard (with headers)
– Ultra-low power usage: a fraction compared to other connected micro controllers

Processing

– Espressif ESP32 chipset
– Dual processor and WiFi radio system on chip
– Network processor handles the WiFi connectivity and the IPv6 stack
– Main processor is entirely free to run the user application
– An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA

Sigfox Operating Frequencies

– RCZ1 – 868MHz (Europe)
– RCZ2 – 902MHz (US, Canada and Mexico)
– RCZ3 – (Japan and Korea)
– RCZ4 – 920-922MHz (ANZ, Latin America and S-E Asia)

Interfaces

– 2 x UART, 2 x SPI, I2C, I2S, micro SD card
– Analog channels: 8×12 bit ADCs
– Timers: 4×16 bit with PWM and input capture
– DMA on all peripherals
– GPIO: Up to 24

Memory

– RAM: 512kb
– Flash Memory: 4MB
– GPIO: Up to 24
– Hardware floating point acceleration
– Python multi-threading

Sigfox Specification

– TI CC1125NarrowbandTransceiver
– Class 0 device. Maximum Tx power:
+14dBm (Europe)
+22dBm (America)
+22dBm (Australia and New Zealand)
– Node range: Up to 50km
– Sigfox pre-certified (October 2016)

Power

– Voltage Input: 3.3V – 5.5V
– 3v3 output apable of sourcing up to 400mA
– WiFi: 12mA in active mode, 5uA in standy
– Sigfox (Europe): 17mA in Rx mode, 47mA in Tx mode and 0.5uA in standby
– Sigfox (Australia, New Zealand and South America): 24mA in Rx mode, 257 mA in Tx mode and 0.5uA in standby

Size

55mm x 20mm x 3.5mm (Without Headers)

Customers also purchased

9V Block Batteriehalter

9V Block Batteriehalter

2,38 EUR

Genuino Uno R3

Genuino Uno R3

23,80 EUR - 20,23 EUR

Pololu 38 kHz IR Entfernungssensor (High Brightness)

Pololu 38 kHz IR Entfernungssensor (High Brightness)

6,32 EUR

Nova SDS011 Feinstaub Sensor Modul

Nova SDS011 Feinstaub Sensor Modul

29,95 EUR

GSM Antenna ANTA2000A0200BR11

GSM Antenna ANTA2000A0200BR11

5,95 EUR